-
General Tackle Queries
Hi
I have two general questions aboud fishing tackle.
Firstly, I have heard that I should put some sort of wax coating over my cork grips on the rods to prevent them from rotting. I have never ever done this and always thought if I did, wouldnt the grip become really greasy and feel funny everytime you went to use that rod. I was wondering what are others thoughts on it. Also what wax should i use if it is necessary and what is the best way to apply it.
Secondly i have never also applied backing line to my reel before winding on the fireline. I have always only ever loaded the reel with fireline. I have now seen what a waste this can be. Does everyone back the reel first or straight up load the fireline on. Those who back the reel first, what line size and brand should i be using? And doesnt the fireline dig into the backing line seeing that the fireline would have a smaller diameter?
I hope these queries make sense, as it is early in the morning.
-
Re: General Tackle Queries
for the cork question, you can put wax on it but ive found it stays good without it.
backing, yes i do. I usually use either a bit heavier mono or the same weight. Its there to chock the fireline up so it fills the spool more.
-
Ausfish Platinum Member
Re: General Tackle Queries
As long as the cork is dry it won't rot. Never use backing of a lower line class and make sure its at least a half decent mono none of the cheap bulk spool stuff (you don't want to loose 20-30 bucks worth of braid because the backing knot brakes because you used budget mono). Wind the mono on hard to prevent the braid cutting in.
-
Re: General Tackle Queries
I use aeroflyte model aircraft dope on my cork grips, it is a waterproofing agent for balsa wood, available from any hobby shop. it works perfectly and you can not tell that there is anything on the grip. they feel the same and look the same, the only thing is only put a tiny bit on, like one coat because it becomes crusty if you put to much on. if u put the right amount on you wont even be able to tell there is anything on it except for when u put it under the tap and watch all of the water roll off the grip.
Dave
-
Ausfish Gold Member
Re: General Tackle Queries
i leave the plastic wrap on mine
-
Ausfish Platinum Member
Re: General Tackle Queries
havent put wax on my cork handles yet and they havent started to rot as of yet
always run a backing of the same weight rating or slightly less.
why would you leave the plastic wraps on ? i dont see the point of this
-
-
Ausfish Addict
Re: General Tackle Queries
You need the backing to stop the fireline slipping on the spool. I had one reel where you could pull line off the reel - but the spool didn't move. The whole lot of the fireline was turning on the spool. I back it with mono all the time now.
-
Ausfish Platinum Member
Re: General Tackle Queries
cork grips don't need anything on them, aal they need is an occasional wash down with a rag soaked in methylated spirits & they will look good as new.
i use backing for fireline because i cant remember the last time i had a fish take 120 odd metres of line
off me & it is too expensive to have sitting there doing nothing..
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules