-
HJ75 Gearbox.
I have a 75 series toyota trayback and the gearbox is leaking oil badly between the sections.
Where is the best place to buy a bearing overhaul kit to suit.
And can the gearbox be removed from the chassis or will I have to pull out the engine and transmission in one as there is a cross member directly behind the box.
Cheers Kev.
-
Re: HJ75 Gearbox.
Kev, not sure where you are, I know Toyota is as expensive as hell, If your in Queensland (although it doesn't matter) look up 'Queensland Cruisers' in Rockhampton, they stock or can get just about anything for a Cruiser and at competitive prices. No affiliation Yada Yada Yada.
You can remove the box without removing the engine, taking the Transfer Case with it. It is good to have a hoist and gearbox jack/stand to do this cause the weight in the pair is incredible. If you don't have access to a hoist at least try and borrow two trolley jacks and get a couple of mates to help you.
HTH
Corry
-
Re: HJ75 Gearbox.
Thanks for that Hard Corr
-
Ausfish Gold Member
Re: HJ75 Gearbox.
kev, if you can hang on until tuesday i can try and get you a kit at trade price through work. jackstands andn trolley jacks here as well.
kris.
-
Ausfish Silver Member
-
Ausfish Bronze Member
Re: HJ75 Gearbox.
Kev, Had a similar problem with my hj75 troopy. The transfer case was pumping the oil into the gearbox and pressurizing it. Fitted an equalizing tube and have not had a problem since. That was over ten years ago.
Tony
-
Re: HJ75 Gearbox.
I am aware of the oil transferr problem and will be getting a pipe made for sure.
Had another look and I am not looking forward to getting that sucker out (big and ugly). I think I might palm it off to the local transmission man to pull it out and refit it after I fix the box.
Thanks for the replies Kev.
-
Ausfish Bronze Member
Re: HJ75 Gearbox.
Don't need to have a pipe made, Thomsons or Repco will will have the mod. I've got the Toyo workshop manuals if you want to look/borrow them.
Tony
-
Re: HJ75 Gearbox.
Got a manual the other day thanks mate.
Don't look to hard, I think I can do the box in my shed.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules