PHP Warning: Use of undefined constant VBA_SCRIPT - assumed 'VBA_SCRIPT' (this will throw an Error in a future version of PHP) in ..../includes/functions_navigation.php(802) : eval()'d code on line 1 Landy bling parts 1 and 2
After 100k it was time to remove the Landy's BF Goodrich shoes. I promised myself when I bought her in 2000 that when I changed the tyres I'd replace the steel rims and go for alloys.
5 Years later a set of 265x75 Coopers ATR's now sit upon some 16 inch CSA alloys. Do you know how hard it is to find alloys that can actually fit Landrover hubs?
You might also remember a few months back I also busted a shock and only temporarily replaced it. Opted for new EFS shocks and 50mm oversize King springs all round. The defender was already running 20mm longer springs so the overall lift was around 30mm.
The misses says that the larger tyres and bigger springs now require me to get side steps. Who am I to argue.
And to cap it off the Landy is currently at MR Automotive Redcliffe getting a new Bruce Davis ECU fitted. The horsepower should go from around 75 to 110-120hp.
So still to come: straight through exhaust - sidesteps - buff and polish - maybe just maybe a bigger intercooler but we'll see on that one.
Wheels look realy good Brett and the lift will make it great off the road. But how about a full side on shot so we know what to look out for.
With the bigger shoes more clearance and some extra right pedal you might now be able to keep up with the Jeeps. (nudge nudge)
Cheers Kev.
Nice bugman , td5 hey, i did the exahust and recalibrated the fuel pump in my 300 tdi a while back ( the boys ar MR did it ) made a huge difference, highly recomend the straight through exhuast in 2.5 or 3 inch.
i not sure if you have hered of Maxi-Drive Engineering on the gold coast, but they do some awesome stuff for landies. if you are on the beach or 4wd a bit i very highly recomend the axle flanges ( will take a pic of mine ) they lubricate the ends of the axle properly and do away with the little pershiable rubber caps which crack and fall out after a while leaving your axle to start rusting away. you can do a search for them on the net there got a site. ( not sure how they would work with the alloys on thou. )
Wheel Base is 262.6cm.
The front is standard as per all Jeep.
Just looks longer as the wheels are only 235/15 and the springs are sagged bad.
Longer in the tail for the CJ8 from the rear door edge back.
Hello
They have got to have the shine off by now, how are they going? Wet? or been on slippery ramps/slides yet??? My update is due for a change, looking very closely at these.