Results 1 to 10 of 10

Thread: 100 ser cruizer sub floor

  1. 01-09-2006, 07:22 PM #1
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    100 ser cruizer sub floor

    a few days ago i went down to the local 4x4 dealer and enquired about the price for alockable sub floor for the back of the cruizer and fell over when i was told $ 1800 clams for a run of the mill one. When i picked myself up off the floor, i marched over to the local hardware shop to build myself one, and share this small build with you guys, incase you were thinking of doing the same.Below is a photo of the frame of the structure welded togeather buy myself with a small mig( or you can use stick) out of 25mm x 25mm gal square tubing which cost me $60 bucks....
    Reply With Quote Reply With Quote
  2. 01-09-2006, 07:28 PM #2
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    Re: 100 ser cruizer sub floor

    next i slid this subframe into the back and worked out the measurements for a smug fit with the top board which is yellow tongue flooring which is slightly water resistant and cost me 30 bucks...
    Reply With Quote Reply With Quote
  3. 01-09-2006, 07:29 PM #3
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    Re: 100 ser cruizer sub floor

    the top board...
    Reply With Quote Reply With Quote
  4. 01-09-2006, 07:29 PM #4
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    Re: 100 ser cruizer sub floor

    other side...
    Reply With Quote Reply With Quote
  5. 01-09-2006, 07:31 PM #5
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    Re: 100 ser cruizer sub floor

    open side slots..
    Reply With Quote Reply With Quote
  6. 01-09-2006, 07:31 PM #6
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    Re: 100 ser cruizer sub floor

    other side..
    Reply With Quote Reply With Quote
  7. 01-09-2006, 07:34 PM #7
    insideout
    insideout is offline
    Free Membership insideout's Avatar
    Join Date
    Jan 2006

    Re: 100 ser cruizer sub floor

    and i carpeted it , but no photo yet, i run into a problem with the draw runners and will have to keep you hanging for a few days.....
    Reply With Quote Reply With Quote
  8. 02-09-2006, 05:44 AM #8
    luckyone
    luckyone is offline
    Ausfish Silver Member
    Join Date
    Dec 2004

    Re: 100 ser cruizer sub floor

    looks good wat are the runners u used imite be makeing one too
    Reply With Quote Reply With Quote
  9. 17-01-2007, 05:26 AM #9
    luckyone
    luckyone is offline
    Ausfish Silver Member
    Join Date
    Dec 2004
    where did all the photos get too
    Reply With Quote Reply With Quote
  10. 17-01-2007, 05:57 AM #10
    choppa
    choppa is offline
    Ausfish Addict choppa's Avatar
    Join Date
    Feb 2006
    mate,,, you beat me to it,,,like yourself i'm building one for the back of the dual cab,,,,after having the luxury of the old cab chassis with the tool box on the back,,,i found it took up to much room in the tray of the new truck,,,

    as a handy hint for anyone contemplating on doing this,,,shop around for your box steel,,,i was quoted from $11,length of 6.1 mtrs 19 x 19,,,up to $45 length of 8 mtrs for he same,,,PLUS $1 per cut to length

    runners for drawers are simple enough,,,once your pics return i'll have a look at your frame,,,i'll post mine as soon as

    choppa
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules