My Polycraft Finished

[Brett_Finger]

well it has only been a few weeks since i spoke to the crew at Polycraft and thay have amazed me with their fast turnaround and i have my new fully survayed guiding boat for the estuary.
here are the snaps of the new family member.
hookin,Brett

[Brett_Finger]

[Brett_Finger]

[Brett_Finger]

[Brett_Finger]

[Brett_Finger]

[Brett_Finger]

[Gorilla_in_Manila]

Guess you still have to mark the lines on the foredeck tennis court.
Does the customer get to park his butt on the deck, or is there another pedestal seat yet to go on?
Good lookin' tub!
Cheers,
Jeff

[krazyfisher]

brett
looks great love the colour should be a good boat
have fun

[Brett_Finger]

GIM,
mate there ar padded cushions for the clients
hi- density foam inners.
thay are at the upholstryers now (bad spelling)

Kraz,
only one in the country that colour mate.
Hookin,Brett

[gif]

Hi Brett

Apart from all the nice ride / stability and good value I feel that the ability to choose any colour is a unique feature. Sure you can paint metal boats - but it costs a lot extra and chips off anyway.

Just a few detailed questions if you don't mind the hassle.

Anchor well: is seems covered up with carpet - I assume there is an anchor under there - is it a hinged lid that you can stand on ?

Are both forward bins plumbed for livewell or just the port side?

Is the starbord Lid hinged on the left or just shown that way?

I'd love to see some more detailed photos on the forward deck you built. Is it marine ply with carpet?

Looks like heaps of storage - what are your plans for rod storage/ stowage?


Can you easily open the split lid on the port Livewell with the electric motor stowed?

I see one bilge pump mounted externally - is that for the livewell? Any advantages over internal mounting? ( I thought maybe because of survey foam)


I love these boats - so nice to ride and so easy to do clever things with their layout. The double layer, one piece hull gives a soft ride and a nice cavity for laying wires and pipes.

Cheers!

Gary

[Brett_Finger]

Gary,
Anchor well;
yes it is hinged Marine ply,and yes you can stand on it with no probs about the strength (i'm 130kg's #)

plumbed frount wells;
i opted to only plumb one side and seeing the boat is foam filled i use the other for an eskey #

starboard lid is hinged as well,all hatches are hinged under the carpet.

rod storage is no probs,
i use for my personal rods small 4'11" plug rods so thay fit fine,my spin sticks and rods for clients are 2pc Penn,and fly rods are in tubes as well.
am instaling berkley vert rod holder on the side as well.

livewell split lid opens no problems with Minn up,i made sure i of it when positioning the minn.

Marine ply for the hatch lids is 14.5mm and for the double bulkheads,12mm.

Bilge on the outa hull,that's where i mounted it no other reason,altough i got me one inside as well #

soft ride - smooth - stable you got it in 3 mate.
hookin,Brett #

[Gorilla_in_Manila]

Geez Bret, 130kgs?? Hope you went the 3/4 inch ply! (like me - 260lb and obviously on a good paddock).
For anyone else wanting to fit out a boat and watching the budget; I bought 3/4 inch marine ply for $140 for a 8ft x 4ft sheet which I used as my main deck inbetween my bench seats in my tinnie. (note: this wasn't the old marine ply with the burgandy surface layers either side like it used to be) Then I learnt that 3/4 inch construction ply was $85 a sheet (same size). Same glue and made in the same place; only difference is that the marine ply is made so that they make sure the layers are all 100% solid timber. Construction ply is made with one side nice (to be used against the concrete as form), and the other side complete but not so nice. The layers in between are made up of lesser quality pieces with some gaps. You notice the difference as you cut through it with a jigsaw, but strength wise for a deck, the same. Put the good side up, or if you are covering it with carpet, who cares?
So marine ply is best, but if you are watching the budget, go the construction ply. (there is no fancy anti-rot stuff or anything like that anymore, as far as I know, in the "marine ply").
Sorry Bret, don't mean to say anything against your choice of decking; you have obviously gone for a great quality boat with top quality construction (as you should when making something for commercial use)- anyone else wanting the same should do the same. But since the topic came up, thought it might be appropriate to mention what I learn't fitting out my boat. (probably should have stuck this under the tips for fitting out a boat post).
As I mentioned before, top tub!
Cheers,
Jeff

[Hutch]

Maaaaate,
Looks great, nice colour. Good pics, would make a good article??

All the best for you and the lucky clients.

Hutch

[Brett_Finger]

Hutch,
thanks for the kind words,hope you are getting into them big barra up awonga way!!
hookin,Brett