Hi guys,I would like some advice on my litte or maybe big problem with my leg.

Recently I did some problems to my leg on a beach at the Whitsundays and posted an articale here for some help with my boat which was cavitating major and trim was playing up. I was suggested to check my prop.
I bent one of my blades on my prop,so I was glad and thought I have ot off lightly.
Since getting my prop back, I took it out for a test run yesterday and was deeply dissapointed,the cavitation has almost gone but there is still some vibration and my trim has some problems.

I have an Alpha 1 leg coming of a Mercruiser 210 Hp inboard.
The Trim will trim down of Trailler trim into the water but seems to not move of the highest trim position,It wont trim down any further. >

This problem is frustrating and i will put in to get checked and fixed when the dollars are there but in the mean time would like some advice what I might be up against.

Some questions I was wondering were..
Would the Trim trimmed right up were its stuck cause a vibration when underway?
Is there a motor driving the Trim?
Am I gonna be broke after I fix this problem?


Any help guys would be much appreciated.

Regards..
Jim