Bait Boards

[dicko1980]

I'm in the process of fitting a Fibreglass Bait Board to my Hooker and an looking for ideas on how to mount it to the boat above the motor. So if any one has a good setup on their boat feel free to post some pictures.

Thanks
dicko1980

[Sea-Dog]

I'm in the process of fitting a Fibreglass Bait Board to my Hooker and an looking for ideas on how to mount it to the boat above the motor. So if any one has a good setup on their boat feel free to post some pictures.

Thanks
dicko1980

Above the motor - Immediately I visualised a bait board mounted on top of the outboard cowling

I wonder if that would work??

A smallish bait board shouldn't interfere with tilting the motor all the way up.

You wouldn't want to do it on a newish motor though - also, it would probably look a bit odd.

Hmmm.

[wheelerdog]

mates hooker has the poles bolted through transom, they sit externally i'm sure thats how they do from factory.

[leezor]

Here's mine, sorry bout the dodgy photo. PM me if you want more details.

Cheers,

Lee

[Stubbie Holder]

I don't know if it helps but this is how mine is set up!!

[sid_fishes]

dicko here,s mine works really well

[sid_fishes]

and another

[impulse492f]

Here's a couple of pics of the board i made and mounted using the existing ski pole. I didn't want to modify the boat to keep the resale value.





Here is the old thread which is still up but only for a sort time, it has a lot of pics.

http://www.ausfish.com.au/forum/YaBB.pl?num=1159823596/30

[Roughasguts]

Hi impulse, mate where did you get that plastic chopping board stuff from.
I been looking for ages for that stuff.

[murf]

Hi impulse

top looking job there m8t. I like the tackle box slots and bait hole.

what did you glue it together with???

Cheers Murf

[impulse492f]

Hi impulse, mate where did you get that plastic chopping board stuff from.
I been looking for ages for that stuff.

I bought it in Bankstown (Sydney Metro) form Palstix http://www.plastix.com.au/index.html

The sheet is called High Density Polyethylene (HDPE)

Hi impulse

top looking job there m8t. I like the tackle box slots and bait hole.

what did you glue it together with???

Cheers Murf

I screwed most of it together and only used Sikaflex where i needed it sealed ie bait hatch and the back of the board.

[vermin]

Hey Rob. Here is how I done mine. Let me know if you want more photos or come around and have a look.

[Roughasguts]

Impulse, thank's for the heads up.
Cheers.

[murf]

Impulse, thank's for the heads up also.

Cheers Murf

[Barnacle Billy]

I bought it in Bankstown (Sydney Metro) form Palstix http://www.plastix.com.au/index.html

The sheet is called High Density Polyethylene (HDPE)



I screwed most of it together and only used Sikaflex where i needed it sealed ie bait hatch and the back of the board.

Hi Impulse.

Checked out that website (Plastix.com).
What gauge did u use for your board?
What sheet size did you order?