Rust preventative treatment - new trailer

[Wooly]

Looking for your thoughts on the best treatment for new gal trailer before I dunk her for the first time.

Options I am considering is flushing all the voids with Lanotec, Inox, Tectyl, Vegtable oil, Peanut oil...

Was leaning towards Lonolin based products. howvere was told that can sneek in small holes and lift gal from trailer???? So at this stage Inox is shortening in the odds.

Any thoughts?

[Murks]

i just used fisholene available in spray containers..seems to work fairly well .time will tell i guess but it definitely puts a coat on the trailer , doesnt look that good but if it works who cares what it looks like

[maxwellson]

i sprayed lanox all over new gal trailer, no sign of any rust 18 months later, have done it twice since

cheers Maxi

[Roughasguts]

I tried some concrete floor sealer on me trailer.
Just did a small patch and it seems fine doesn't colect dust either.

I figured after using the concrete sealer in a tub 8 hours later I could pull the clear plastic membrane out the tub.
So thinking that stuff is pretty tuff, UV stable and water proof.

And easy to touch up just melts in to the old stuff.

[Spaniard_King]

I have done mine in Tectyl ... tried lano and other products.. they dont cut the mustard.

tectyl dries to a wax like covering easy top apply.. just buy a air driven degreaser type spray unit (need an air compressor too) from super cheap and get some auto thinners too. mix tectryl and thinners at around 1-1 spray on trailer

you will never look back

Garry

[Roughasguts]

Which one Garry, Valvolene make 55 differant tectyl products.

[Spaniard_King]

LOL 55 hey crikey

tectryl 506

cheers

Garry

[Roughasguts]

Thanks Garry, that cuts down on the reading.
Say's it dries to an ambor colour does that look okay.

[dnej]

Wooly,
What size and what type of boat do you have?
David

[ShaneJ]

I'll second the Tectryl 506 . I use it on everything! Car, boat trailer, the shed

[Wooly]

dnej

Tis a 5.5 seafarer viking

cheers

[Wooly]

the Tectryl 506 is friming. Where is best place to get a supply of this stuff - say a 5 litre bottle?

[PinHead]

it is gal..why bother with anything else...it will outlast your use of it.

[GBC]

lord forbid I agree with one P Webster - but...... go the tectyl for the initial prep, but more importantly mix up some linseed oil and kerosene and spray it on moving parts etc after every trip -

Either that or buy shares in inox.

P.S. Pinhead dunks his reels so don't listen to him any more about maintenance-

Had to do it Greg

C.J.

[ShaneJ]

the Tectryl 506 is friming. Where is best place to get a supply of this stuff - say a 5 litre bottle?

You can get it in spray tins or 5 liter paint tins at supercheap, aussie auto and just about every other auto shop. Well around here anyway.