I've had my 4.6 m Webster twinfisher centre console for about 6 months. Awesome boat, but I've just had this weird problem where the flat metal sheet near the bow between the two hulls has bent from excessive water pressure in a following sea/chop. Now I certainly haven't thrashed the boat or been out in coditions over 10-15 knots and 1.5 m swell and I've only got a 60hp on it so I'm limited to 20 knots top speed, so it's not misuse in my book. You can actually hear the metal flexing when you head down a chop and then meet the next wave. There's nowhere for the water to go but to press on the flat piece of metal. It seem only cosmetic at the moment, but I fear with constant flexing it may eventually crack the joining welds. Anyone had the same problem. I'm going to contact the manufacturer about it today and see what they say.
Any help would be great.