furuno ls6100

[boof]

just wondering which colour wires you use to hook up betewen the Furuno LS6100 and A garmin Gps 152 we know the colours on the gps but cain't work out the colour wires on the Furuno cheers and thanks ron

[Spaniard_King]

Hi Boof,

hard to work it out hey, have you looked here.
http://www.furuno.com/Furuno/Doc/0/Q...n%20Manual.pdf

still not very clear tho

Garry

[88fishframe]

That Furuno link gives me a headache.

The info I have on my old LS-6000 [since upgraded to Furuno colour] is -

WHITE - INPUT TXD-H
BLACK - INPUT TXD-C
YELLOW - OUTPUT RXD-H
GREEN - OUTPUT RXD-C

I take it you have Furuno NMEA cable?

[cyclone]

I'm in the same boat with the new fcv 620 to 172c will be interested to see where this goes. I gather txd and rxd stand for transfer data and receive data.

[boof]

The connection from Garmin GPS153 to Furuno LS6100 should be quite
simple even though confusing in the manuals.

Please connect
Com1 TX line (Blue) of the Garmin to the RD-A line (Yellow) of the
LS6100
And
GND line (Black) of the Garmin to RD-B (Green) of the LS6100.

The Furuno unit follows the NMEA marine standard of isolated Transmit
and Receive lines to prevent Earth loop problems on vessels, and the
Garmin follows the Computer industry RS232 standard of connecting all
data return lines to ground ( 0 Volts )hence the confusion.