Furuno fcv 585 help needed

[Mortalkombat]

I have got the FCV 585 and started the motor for the first time on Sunday morning after fixing the wiring up to the new unit. When I turned the unit on it started ok but would not read properly it kept flicking between depths this was on auto the battery reading was 14.2v .
When I put it to manual mode it read just fine but turning her back to full auto it repeated the problem it seems to be only on the 200khz as well the 50 khz seems ok anyone got any ideas as to what could be up?
I have a Steyr diesel it worked fine when the motor wasn’t running and battery reading was around 13v?
regards Nick

[yakka]

e-mail taylor marine

[Mortalkombat]

took it out yesterday and ran it just fine what an awsome sounder i am very happy with it played with it lots it seems that on full auto it does everythng you would ever need.
Nick

[larfin]

Ive got a 585 as well Nick they shure are an awsome bit of gear.
cheers
greg

[marco]

do you guys have any probelms with the 585 freezing up when switching channels ( data to sonar , on the rotary dail ) , mine does it now and again

[Mortalkombat]

it has not done that but it was the first time i have run mine.
has any one hooked there gps up to it? I have a Furuno 1640 so theroticly it should be compatable