Results 1 to 5 of 5

Thread: Gen4 rod finish

  1. #1

    Gen4 rod finish

    Know of anyone stocking it at present ??.

  2. #2

    Re: Gen4 rod finish

    Quote Originally Posted by Volvo View Post
    Know of anyone stocking it at present ??.
    Never heard of it,try rodworks.

  3. #3

    Re: Gen4 rod finish

    GEN4 Working Properties
    Mix Ratio: 1:1
    Pot life : 30 min at 70 degrees Fahrenheit
    Re-Coat Time: 4 hours at 70 degrees Fahrenheit
    Sag free (rotation time): 3 hours at 70 degrees Fahrenheit
    Tack free time: 10 hours at 70 degrees Fahrenheit
    Fishable after 24 hours, but 48 hours is recommended to allow for full crosslinking

    Just did some googleing and yep therodworks have it the pot life is very good and its the latest epoxy technology.

  4. #4

    Re: Gen4 rod finish

    Nah Rodworks dont have it , trouble sussing it from the States.

  5. #5

    Re: Gen4 rod finish

    Quote Originally Posted by Volvo View Post
    Nah Rodworks dont have it , trouble sussing it from the States.
    Thats funny that’s were I looked for it and found that info well look at the Mudhole then.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •