The prep and painting thread, Caribbean V19

[gazza2006au]

I think u can see here in these pics the paint stripper is only peeling that very top layer, the big stuff that is flaking off is only coming off with the pressure washer thats what i really need to get off down to the blue/green stuff

From the gunnel rubber up has all been coated with paint stripper

[stevej]

1694438[/URL]]I left the paint stripper on so long so it could continue to work thru the thick layer it doesnt do much, the pressure washer is doing most of the work its flaking and peeling the layer of paint off once the jet gets up under the paint it usually keeps running under the paint

as Shaun is saying and your not listening too you don’t leave it to dry out
scratch it up apply wait 15 mins or so use a scraper then wash off
then do it again and again
On warm hot days you have to cover it to stop it evaporating the solvent too quickly

when the stripper evaporates like your doing the paint just hardens again

and in the end of paint stripper won’t work you have to mechanically remove it with files orbital sanders or whatever to remove it

[shaungonemad]

If all else fails read the instructions.


Sent from my iPhone using Tapatalk

[gazza2006au]

The paint is easy to remove weather its been 1 hour or 48 hours since the gel was brushed on there is no problem there

[disorderly]

I know of a bloke who removed the paint from his boat with a grinder once...

[shaungonemad]

I know of a bloke who removed the paint from his boat with a grinder once...

I thought it was a chainsaw?[emoji1787]


Sent from my iPhone using Tapatalk

[Dignity]

I know of a bloke who removed the paint from his boat with a grinder once...

That'll work if you use a poly wheel gently.
And the paint must be crap condition if it comes off after 48 hrs use stripper as once the stripper dries out the paint rehardens, even says so on the can but then I forgot who was doing the job.

[gazza2006au]

Oh dear do i have to repest my self for the thick...

[Cobbo1]

Once you’ve applied a thick coat, cover it with cheap painters plastic gaz, as soon as it dries the slightest bit it stops working, give it half hour with plastic on it and most of it will pressure wash off quite easily

[Dignity]

Once you’ve applied a thick coat, cover it with cheap painters plastic gaz, as soon as it dries the slightest bit it stops working, give it half hour with plastic on it and most of it will pressure wash off quite easily

Seems to be a common comment but it seems Gazza is still going to do his own thing. I'm out of here.

[bluefin59]

Oh dear do i have to repest my self for the thick...

Only one pest that’s thick around here pal

[gazza2006au]

Only one pest that’s thick around here pal

This is a discussion forum, all i see from you are insults i'd like to see u around people in real life throw insults you'd shut your mouth pretty quick

[shortthenlong]

Did you just say you found Bluefin59 pretty? @gazza2006au

[banshee]

Some of you blokes have the patience of Job..........

[disorderly]

Did you just say you found Bluefin59 pretty? @gazza2006au

Hmmm...seems to be something going on...

gazz loves matt.jpg