Page 14 of 14 FirstFirst ... 4567891011121314
Results 196 to 203 of 203

Thread: It Begins..... Seafarer Ventura Stringers and floor.

  1. #196

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    If that bracket goes anywhere it will only be because it has taken the transom with it.
    It's a Seafarer not a Cruisecraft.

  2. #197

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    Quote Originally Posted by Fed View Post
    It's a Seafarer not a Cruisecraft.
    That's right......so it's not going anywhere 😉

  3. #198

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    Quote Originally Posted by ranmar850 View Post
    Done properly, there are no issues with this. Of course, there is no point hanging it off a rotted transom, what you are bolting to to needs to be solid. You need to remember that the thrust is being applied at the bottom of the leg, via the prop, so the thrust is pushing , effectively against the whole transom, not acting purely as a lever against that extension. I could see absolutely no deflection on mine, with full throttle starts on the F115. My transom was proved good when they drilled, clean dry wood.
    Yeah
    I was a little worried when it was being installed
    I thought the transom was solid. It had been replaced previously and felt and sounded solid. But you can never be 100% sure with a second hand boat......
    It's all good though, when he installed the motor he said the transom is solid as a rock, no rot at all.

    Sent from my [device_name] using Ausfish mobile app

  4. #199

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    Decided to modify the canopy. It was the old one, which was a bad fit, made worse by me putting the rocket launcher on.
    Decided to cut 10 inches out of it to make it fit inside the rocket launcher, and going to make it a foot or 2 shorter so it doesn't extend past the screen.
    Found a virtually perfect fitting piece of pipe and some rivets, feels more rigid the new.....
    Now to get some quotes to get it upholstered.......
    Need the bunks inside the cabin done too, if anyone wants a cashy???20190724_121755.jpg20190724_121806.jpg20190724_121855.jpg

    Sent from my [device_name] using Ausfish mobile app

  5. #200
    Ausfish Silver Member
    Join Date
    Apr 2014
    Location
    Brisbane

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    Hey.
    Did you ever get that Bimini finished?
    Photos?

  6. #201
    Ausfish Silver Member
    Join Date
    Apr 2014
    Location
    Brisbane

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    Bump Bump.

  7. #202

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    Bit slow. Been real busy. Sorry.
    I went with an old T Top that i got for nothing as it was busted. Modified it and fitted it to my rocket launcher.

  8. #203

    Re: It Begins..... Seafarer Ventura Stringers and floor.

    20210119_151706.jpg
    Took a bit on my satellite internet.... But here's a shot of it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Join us