Stejcraft Monaco 640 2017 Model

[megabucks]

Hello to all
Anybody has a Stejcraft Monaco 640 Cruiser?
I have purchase one and I am taking delivery next month. Just want to know a bit more about the Craft.
I always had Haines Hunters in the past.
Thank you

George

[Crocodile]

Re: Stejcraft Monaco 640 2017 Model

Hello George,

My cousin has one and I have driven it.
Very comfortable and well laid out boat.
Heavily loaded with cruising gear ( big fridge etc) but only three pax and powered by a 150 four stroke Suzuki.
Needed lots of revs to plane and would drop off plane suddenly if you let the revs drop.
Did you have a water test?
There is no easy way to say this but you may be disappointed with the ride, my cousin is, it did thump in inshore chop.
Sorry for being direct but you did ask.

[megabucks]

Re: Stejcraft Monaco 640 2017 Model

Thank you for your advice. I will be having a test drive when the boat arrives from VIC. I put a deposit $ 1000 at the boat show. It was between Haines Hunter and that one. I ask for a Mercury 150 HP four stroke.

[stang69]

Re: Stejcraft Monaco 640 2017 Model

If you are comparing it to a Haines Hunter then you will be disappointed in the ride. Can you still change your mind without losing your deposit? lol

Where was this one built? Australia, China, or America? They seem to change their factory location every couple of years.

[megabucks]

Re: Stejcraft Monaco 640 2017 Model

I don't care if I loose the deposit. I will take a test drive when the boat is ready. This one is made in VIC. Tim the owner of the factory sold it to me at the boat show. Never asked for a test drive but I think that I will request for this when they call me to go to pick it up. I want to be able to fish offshore. I go far close to the Peak. I mean is a 6.40 meter boat. Has to be better from my last Haines Hunter 575 Profish with the 125 Mercury 2 stroke.

[stang69]

Re: Stejcraft Monaco 640 2017 Model

I think they are the same as Savage fibreglass as well. I cant keep up. China, Vic, USA, QLD. When are they going to build them in Africa?
I had a Haines 580 Breeze, same hull as the 575 Profish. Very good boat. I'd be interested to see how they compare.

[MyWay]

Re: Stejcraft Monaco 640 2017 Model

I saw one of the Goldy few months ago at 36 f in average condition and looked pretty nice, but I can't tall you how they got there .
keepus posting very interesting to find out how they ride .

[megabucks]

Re: Stejcraft Monaco 640 2017 Model

I will keeStately Stejcraft Monaco 640 Cruiser
Wayne Kampe | First Published: April 2014

AddThis Sharing ButtonsShare to Facebook
Share to Twitter
Share to Reddit
Share to Pinterest
Share to Google+
Share to Email






Save as .PDF




The Monaco 640 Cruiser is right at the top of the Stejcraft range. This a very well put together fibreglass craft, and needs to be, as she’s competing for sales in a market niche where our high dollar is seeing a lot of overseas manufactured craft in boat yards around the country.
While it’s readily acknowledged that overseas-made craft, more particularly those from the USA, are very well made, they are also pretty hard on the pocket and this is exactly where the Victorian-made Stejcraft Monaco 640 Cruiser has some advantage. The finish is right up with the best and so is the value.
A very handsome lady with a flair for the sumptuous, the Monaco is an eight person craft with strong family boating credentials. With galley, toilet, dining table, and a fresh water shower, there’s comfort to spare with room for up to four to sleep within the very large cuddy cab (with bunk infill). This is all complemented by a high standard of fit out and finish that oozes class from stem to stern. Yet those same credentials would make the Monaco a terrific offshore fishing rig once the aft table is stored, rods and tackle set up for serious use.
General Layout

Overviewing the Stejcraft 640 Monaco Cruiser I noted a bow roller and bow sprit nestled within strong bow rails that extended virtually back to the rear of the cuddy cab.
The Monaco’s locking anchor well was accessed via a wide fore cabin hatch and it’s an easy matter to lift the pick while firmly braced against the side of the hatch.
The cabin was fully-lined and thanks to large side windows, was very well light and airy. Moulded bunk framework was graced with deep and attractively patterned cushioning, well-padded back rests, and I noted plenty of useful storage space under each bunk. A marine toilet was standard; user’s privacy assured thanks to a folding cabin door.
Stejcraft had obviously put some thought into their Monaco’s helm area providing both shelter from a tastefully tailored extendable bimini on stainless framework stretching overhead, with clears able to link with the craft’s five piece wind screen.
Innovative seating

The Monaco Cruiser’s helm area was an interesting and carefully thought out set up. Very strong and comfortable fully swivelling seats for skipper and mate were set on storage box style bases which, being hinged, could be flipped backwards to allow access to a two-section galley below the seat bases. Under the port seat was a sink, under the skipper’s seat was a spirit stove. With seats unlocked and flipped back it would be easy to access the galley items for preparation of a meal or snack and then enjoy it at the craft’s dining table aft.
At the helm area front passenger comfort was enhanced by a grab handle, foot rest, tiered side pockets and strong bed end style foot rest while the skipper was treated to a drink holder, similar side storage shelving and foot rest. Both skipper and mate’s seats were equipped with very high backrests for ultimate support under way. I noted that visibility was fine from either seat.
Walnut trim on dash

The Monaco’s dash area also caught the eye thanks to a selection of tasteful imitation walnut trim. The dash was a multi level affair with a drink holder and compass uppermost while the next level featured a Lowrance Mark X Sounder unit with a bank of switches and GME marine radio immediately below.
To starboard of the craft’s deluxe three-spoke wheel another walnut insert highlighted twin Yamaha gauges linked to the 150 4-stroke astern. A padded section on the side of the craft adjacent the skipper was set up with the engine’s forward controls which fell easily to hand, as they should.
Enjoy a meal in the cockpit

The Monaco Cruiser’s cockpit was fully carpeted and featured ample padding aft, a gunwale grab rail plus deep side pockets able to store tackle boxes and other equipment. A highlight was the removable, drink holder equipped, aft table which offered room from Mum, Dad and a couple of youngsters to enjoy breakfast or dinner while seated at the aft modular lounge which also, being on paired storage bins, offered considerable storage room under it. Note that the lounge, and storage boxes below could be removed if necessary.
The Monaco Cruiser’s cockpit was quite deep at 780mm depth and offered fishing room for three or four anglers. Rod racks within the side pockets plus a bait tank aft were useful items for anglers: completing aft features were twin non-skid boarding platforms with a ladder and grab handle set to starboard.
150hp Yamaha ample power.

Engine ratings for the Stejcraft were from 115-225hp. Fitted with a four cylinder 2.6L 150hp Yamaha four-stroke the craft never seemed short of power. How it would perform with a 225hp on the transom was fairly mind blowing considering that the 150hp easily planed the craft at 9 knots (18km/h) at 2,800rpm and cruised very easily at 3000rpm at 18 knots (34.6km/h). The 4,000rpm registered a speed of 25 knots (47.3km/h), and 5,000rpm seeing us slipping along at 33 knots (62.4km/h), 6,000rpm a lusty 42 knots (78.8km/h).
Obviously, the Stejcraft’s 22º deadrise hull was a very slippery one given the ease in which the 150hp Yamaha four-stroke shifted us along with two aboard. With the throttle depressed rapidly, the rig crested onto the plane in around 20m – impressive stuff.
Ride and handling of the big Stejcraft reflected the 43 years this company has been manufacturing pleasure craft. With its deep Vee double chine hull, the well-formed and quite prominent under hull strakes, and a solid hull weight of some 970kg the Monaco rode brilliantly. A run-out through the Gold Coast Seaway reinforced my initial thoughts on ride quality as the craft gently crested incoming swells and, when pushed harder, jumped gently over the larger ones to land with a graduated sort of impact rather than a hard or noisy one.
Riding back over incoming swells presented no problems whatsoever as the rig stayed right on track and when power was needed the Yamaha 150 was happy to supply it. In all, ride quality is obviously going to be a selling point with this craft, along with excellent performance.
Summing Up

Overall, I saw the Stejcraft Monaco 640 Cruiser as a great value for money family or fishing craft with potential to fish anywhere from bays, estuaries or well offshore. Fuel capacity was 150L, freshwater was 48L (if this option was taken up) so a weekend on the water cruising and fishing would be just as enjoyable as running offshore for some blue water work.
There are not many craft of this particular size that provide the overall comfort levels and special features of this well appointed rig, which help make it so special.
On a tandem Dunbier trailer, with safety gear and registrations, the Stejcraft Monaco would come home from Broadwater Boating Centre of the Gold Coast, as reviewed, for around $66,990. For more information contact Broadwater Boating on (07) 5529 1777 or log onto www.broadwaterboating.com.au.
Facts

Technical Information

Beam:	2.50m
Deadrise:	22°
Weight of hull:	970kg
Fuel:	150L
Water:	48L
Engine ratings:	115-225hp
Power fitted:	Yamaha 150hp 4-stroke
Persons:	8
Towing:	4 x 4 wagon

p you post. See attached the review I found on the net.

[DaveR]

Re: Stejcraft Monaco 640 2017 Model

I think they are the same as Savage fibreglass as well. I cant keep up.

From what I understand, a few years ago Stejcraft launched a range of NZ-designed Sea Nymph hulls under license, then Telwater snatched them, made some interior/exterior design changes and launched them as Savage's new fibreglass range, and Stejcraft went back to their previous hull design which is what you see today. That's what seems to have happened from what I've seen. I would love to know the actual story behind it all. Since Telwater launched the Savage hulls they've had plenty of acclaim, in particular the 585 model, yet not many people knew they existed when they were briefly sold by Stejcraft. But yeah, the current Stejcraft hulls are completely different to the Savage range.

For what it's worth I think the Stejcrafts present very well. You will have to decide on the ride when you test it. If it's not up to scratch, look at a Savage 645C, similar money but the NZ-designed hulls ride very well and you get the Telwater backing with their 10 year hull warranty. Although I don't think you will have any problem with the Stejcraft.

[stang69]

Re: Stejcraft Monaco 640 2017 Model

So where are Savage and Stejcraft built today?
The old fibreglass Savage are now Whittley Clearwater. Or at least they were. Sounds like musical chairs.

[DaveR]

Re: Stejcraft Monaco 640 2017 Model

Today Stejcraft are apparently back in QLD after being all over the place.

Telwater on the other hand still have their Savage hulls done by the original NZ company, however they've merged with an international Chinese builder which, from what I read, builds hulls up to 13m for a number of brands at what is supposedly a massive state of the art humidity controlled facility near Shanghai. That's what Telwater says at least.

[megabucks]

Re: Stejcraft Monaco 640 2017 Model

Interesting. Thank you for that. Did not even know about it.

[Tangles]

Re: Stejcraft Monaco 640 2017 Model

All i can say is a mate has one, has fished out of it at the AGnes M&G for years, has a 150 Optimax and the economy is very good, the ride is no issue, actually it surprises people how good it is off shore. Its not a famous brand so people will i think be more likely to knock its ride compared to the big bys but a lot always depends on the skipper and how they drive it, a bad skipper can make the best boat look bad as well

When my mate got it it, i thought Stejcraft? i think they are a great boat with heaps of room, only note i have is not really setup for fishing so once that is sorted put the money you save into toys for the boat

[megabucks]

Re: Stejcraft Monaco 640 2017 Model

Yes I agree with you. I purchased this boat not only for fishing but also for Cruising. My wife does not like fishing as much I do. So defeats the purpose. it has a very good lounge in the back that can be removed for fishing at any time.
As for the Skipper not a problem. This is my 8th boat I owned in Australia. My first one was a Stejcraft back in 1988. I found out this after purchasing this one.
I will know next month. I am taking delivery first week of November.

[megabucks]

Re: Stejcraft Monaco 640 2017 Model

A small delay for delivery. Will be getting the boat now end of November.
Is going to look just like this one.