Navico Totalscan transducer

[timTD157]

So I currently am running a HDS gen 3 with a HST-WFSBL 50-200 and LSS-2 combination and while I feel it is adequate for the money I was never really blown away.

Now with the Totalscan option I was thinking of going down this path and using a TM150m for chirp instead of the 50-200 HST-DFSBL.

All I seem to come across is negatives about the TM150 and am hoping to hear from people who have a TM150 and are happy with it. Also has anyone used this new totalscan transducer?

I mainly fish off the Sunny coast in 25m-65m with the occasional trip up the GBR so sheer power for deep water (a al TM275) is not really needed. I am mostly interested in good target/structure separation.

Cheers,

Tim

[Jakers 69]

Mate of mine bought a totalscan transducer, and he struggles with it. No arches etc.

[chocolatemoose]

i was very happy with my TM150.

[Moonlighter]

So far very happy with totalscan and my Simrad GO7xse.

[timTD157]

How was the performance underway Moose?

And what boat was it on?

Ill be fitting it to a Signature 543 which has quite a lot of deadrise towards the center line, I had to move the HST-50/200 around quite a bit to get it to read at speed.

[hungry6]

So far very happy with totalscan and my Simrad GO7xse.

How do you find this unit work in deeper water around 80-120m?

[Moonlighter]

How do you find this unit work in deeper water around 80-120m?

Not been that deep yet to test. Will report back when Ive tried.

[sam687]

I have a TM150 and while it will track bottom at WOT about 70kmh I have to be almost at idle for it to show any fish.