HDS 9 gen 2 Puch Buttons

[Jakers 69]

Hi, hope someone can help.
My Lowrance gen2 buttons stopped responding, only the on/off work, as well as the touch screen. The problem is you can't access the pages function to switch between GPS and sonar.

It did get some drops on it but nothing major and always cleaned after each trip.
Any advice?

[patrol50]

well if you ring lowrance in sydney they will probably tell you to try a soft and/or then a hard reset - info below - and then to reload latest software using a 8 gb card and insert it and auto reload it on the unit - so may as well try it - but save your marks if yu can before you do this
cheers


and if thats dont fix it then give lowrance a call on 1300 628 426 while sitting in front of your unit

Soft Reset (Does not delete GPS Data)
1. Turn unit OFF
2. Press and hold the PAGES key
3. Press and Release the PWR key
4. Release all buttons when the USA
map appears

Hard Reset (Deletes stored GPS Data
such as Waypoints and trails)
1. Turn unit OFF
2. Press and hold the ZIN&ZOUT Keys
at the same time
3. Press and Release the PWR key
4. Release all buttons when the USA
map appears