Results 1 to 2 of 2

Thread: need help!!

  1. #1

    need help!!

    2 questions, picked up a new tinny for christmas and have done a total refit inside ready for chucking lures in the bay for our annual trip to straddy on the 13th jan.

    need a service before i take it and sadly due to the timing everyone is booked pretty solid, any ideas? on the north side of brissy and would prefer a mobile guy. its a 30yam tiller

    also have a new bow mount to fit, it has a slightly curved bow and was wondering if i can just fix it straight to that? can get it to open and work but its on a slight angle when down and I'm thinking it would sort of pull the bow down a bit/not work as well as it should. or do i need to get a bracket made up? if that any ideas who? and how thick/what grade plate should i use? mobile would also be nice for this too.

    thanks in advance

  2. #2
    Ausfish Silver Member
    Join Date
    Mar 2003
    Location
    ALBANY CREEK

    Re: need help!!

    Jeffers Bay sport motors - Brewer Street Burpengary be a go- there not mobile but very good.

    Ref your mounting of your electric- my mate as a similar situation- from recollection he has used a few large stainless bolts /washer with additional nuts along the shaft to allow level adjustment. Recommend using duralc or appropriate silicon to reduce corrosion.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •