Lowrance structure scan and sonar synchronising

[toddo1]

Hi guys, when I have a split screen of sonar and structure scan on my hds 9, and I find fish/object in water, I touch it to bring up cursor to mark a waypoint/spot!! I can clearly see fish on both sonar and structure but cursor is not on the fish/object in structure scan side of sounder! It's off slightly. Is there anyway of synchronising the 2 so when I bring up cursor on sonar it's on the exact same spot on structure scan? Or is it just how it is!!

[TheGurn]

My manual says the transducers should be no more than 8 inches apart to avoid this. Hope it helps. Cheers.

Sent from my HTC Wildfire using Tapatalk 2

[toddo1]

Thanks mate, tranducers are probably 2inchs apart, so rules that out! Thanks anyway

[chocolatemoose]

its just a phsyical thing "ooooh i wish i could say that more often"... other than depth ofsets. the location of the transducers are just a side by side job

[toddo1]

Thanks moose, yup there side by side n same height!! So not much I can do about it? Thanks anyways fellas