Reply With QuoteRepower with yammie 4 strokes mate
our sharkie 005.jpgour sharkie 004.jpgour sharkie 003.jpgour sharkie 002.jpgour sharkie 001.jpggday,this is my first post so please be friendly! thanks, i have just bought a 23ft shark cat as a project,it currently has fitted some old 175 johnsons on it which need replacing! the question that i have is what to repower with and if some one can tell me what year the hull might be.any info on the boat good or bad would be appreciated.
Repower with yammie 4 strokes mate
what hp do you think mate?
2 of these.......
150hp 4S Yamaha...
150 s would push it pretty hard
cheers! never owened one or even been in a 23 shark cat could be interesting,would imagine decent fuel ecconomy from those 4s 150s!
I know where there's a few F150's for low 20's for the pair. I'll be going out on a 23 with 225 opti's in the next few days. Might be fun. pm me if you want more info.
mate welcome to the forum, very keen to see how the reno progresses, cheers.
have to sell my haines 635l first to fund this project but would like to know how the 23 goes with 225 opti's!! cheers
While 150hp will be more than adequate, Yamaha 150's would not be my pick, especially if you are thinking second hand
Have a look at the Mercury 150 fourstroke as well.
Great reports from these engines and service costs are less.
http://www.mercurymarine.com.au/home...hp/150-hp.aspx
Troy, what do the 150 mercs weigh? ThanksOriginally Posted by Troy Wood
fruit salad is the new Bacon
The merc 150 with a 20' leg is 206kg. The yammie in the 20' is 223kg. The zuke in the 20' is 215kg. The Honda in the 20' is 217kg.
Merc don't seem to give a 25' leg weight but all the others are around 3-5kg heavier for the xl so I would assume that the Merc is similar.
Remember to always log on before heading offshore.
Thanks Ozy!
fruit salad is the new Bacon
Posting Permissions
