Hey to all, I have a Seahunt Triton 188CC with a Yamaha 115hp 4 stroke. I am getting bad cavitation in the turns and a little under acceleration. The prop is a standard Yamaha Alloy done 30hrs. I thought a hydrofoil may be the answer? Any knowledge or experience would be great? Cheers
IMG_0387.jpg
hi Scrotty
No experience with seahunts but Ive had foils on most of my boats and believe they help if your down on power or lift from the prop.
If your on the north side of bris I have a sport 300 and a no drill clip which you can try. I put it on my quinny but it gave my rig to much lift in the rear and made her to broachy for my liking.
PM some contact details if you want to discuss off line .
BigE
Bcf have the sport 200 and 300 on sale for $99 at the moment. I just put one on my 115 merc which is on the back of an Aussie whaler and it has definitely helped lift the bum up a bit.
a foil is the absolute last resort in my opinion, I have a Permatrim for sale, it made my boat very scary in very big following seas if you are not spot on with your trim (I had to bury the nose to stop it from power turning when boat starts surfing going down big waves)
do all the other things first like motor height, prop selection, Solace Prop blades have much more surface area than yours and will hang on better. On some deep V boats you have to trim in on fast turns from optimum speed trim
cheers Murf
Hey thanks for the replies guys. Call me stupid! but I cant see how using a hydrofoil to lift the bum of the boat can improve cavitation? Would that not make it worse? Doesn't the prop need to be deeper? Cheers
The foil traps the water above the prop hence providing more prop surface to water contact. So I believe.Originally Posted by scrotty
I would go a prop first mate, as there will be more benefits than you think.
Get your prop cupped a bit, or better still, get hold of a decent stainless prop, will hang on much better.
Note to self: Don't argue with an idiot. They will only bring you down to their level and beat you with experience....
Hi Mate,
I've got the exact same boat as you.
When I imported the boat from the states, It already had a foil attached and I haven't changed it.
It pushes out of the hole nicely and I dont have any cavitation.
heres a pic of the foil.
Attachment 91290
I really like the baitboard you have setup, if possible could you take a closer pic of it? that's something mines missing!
loving my sea hunt!
Col
Gday Col, I would like to see your Hydrofoil but your pic does not open! Here is another pic of my bait board. I love the bait board as it has made a massive difference and fits perfectly. I do like the Seahunt except for the cavitation, but I will sort that out.
hopefully. Cheers
Cavitation or ventilation scrotty?
here we go maybe its capitation baha anyway a $99 se sport really is the cheapest way out and they make a great step for climbing up the back of the boat new ss prop will cost 700,trim tabs over a grand supply and fitted se sport tab takes 10 mins to fit
Hey Fed, CAVITATION is exactly what I meant! The horizontal fin above the prop on every outboard is called a "Cavitation Plate" , not a ventilation plate.
Major places where cavitation occurs are in pumps, on propellers, or at restrictions in a flowing liquid.
As an impeller's (in a pump) or propeller's (as in the case of a ship or submarine) blades move through a fluid, low-pressure areas are formed as the fluid accelerates around and moves past the blades. The faster the blades move, the lower the pressure around it can become. As it reaches vapor pressure, the fluid vaporizes and forms small bubbles of gas. This is cavitation. When the bubbles collapse later, they typically cause very strong local shock waves in the fluid, which may be audible and may even damage the blades.
Cheers
The technically correct name is "anti ventilation plate".
More than likely your getting prop slip, which can be fixed by propping and motor height adjustments. Standard Yammy props have next to nil cupping. You will find a big improvement with a proper pitched stainless.
Scrotty, could you possibly pm me where you had the bait board made. It is the best one I have seen on a triton
Posting Permissions
Reply With Quote