Results 1 to 7 of 7

Thread: hds conection ?

  1. #1

    hds conection ?

    hi all,
    can the red and yellow wires both go directly to the positive? since all power is isolated when boat is not in use anyway. cheers....
    take a feed & leave the rest to breed

  2. #2

    Re: hds conection ?

    Helped my brother install a HDS 8 with structure scan today. Yellow went straight to positive with the red.

  3. #3

    Re: hds conection ?

    thanks andy, i thought as much. cheers and happy fishing......
    take a feed & leave the rest to breed

  4. #4

    Re: hds conection ?

    Pretty sure the yellow is there for autopilot

  5. #5

    Re: hds conection ?

    Perry Yellow wire is a trigger "switch" wire that will auto boot up unit if the red wire has power it.
    I have my LSS structure scan Yellow wire hooked up to my sounder yellow wire so it boots up when i turn the sounder on.
    Cheers
    Dick

  6. #6

    Re: hds conection ?

    thanks dick

  7. #7

    Re: hds conection ?

    I had read where it may be prudent to hook up the LSS to a seperate switch as it uses quite a bit of power. This would be good out deep as you could leave the main unit on without the increased risk of flattening the batteries.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •