Results 1 to 11 of 11

Thread: cant read backup waypoints - Raymarine a65

  1. #1

    cant read backup waypoints - Raymarine a65

    Have just done a backup of the gazillion marks on my a65
    I cant open the " .FSH " file that it has created on the compact flash card.

    I have downloaded the free rayplanner 6.0 software but it cannot open the file.

    I have done it on two different cf cards and same result for both

    I can see all the waypoints on the a 65 but it has decided now that it wont read any satellites so it cant gain a fix.

    I was backing up, as the boat is going in to get a new donk tomorrow and I wanted to play it safe. I fear the end may be nearer than I thought for the raymarine. I think I have the points on the cf card, and have a card reader but just cant access the info.

    Any helpful suggestions???

    Cheers
    Brendan

  2. #2

    Re: cant read backup waypoints - Raymarine a65

    You can get plenty of used C series out of the US at a good price. I would imagine that a Cf card would read on a C series but a call to Ray in Sydney may help.
    Idea...... my C80 can only handle a certain size card. It is not handy so I can't check. I had to get my CF card from some obscure site that still had older, smaller cards. That may be your problem. Your A65 manual should have the info re card size.
    ROLL TIDE, ROLL.................

    Regards,
    Peter

  3. #3

    Re: cant read backup waypoints - Raymarine a65

    Thanks Peter,
    I put the cf cards back into the unit and deleted an old waypoint them reloaded it and it appears that all bar the last few months are saved.
    The cards are 1 Gb . Interesting that the navionics gold XL9 is only 256 Mb

    There used to be a raymarine installer / service guy down at birkdale but I think he went mining. Who looks after these things now . I am on Brissie northside

    Cheers
    Brendan

  4. #4

    Re: cant read backup waypoints - Raymarine a65

    Give Raymarine in Sydney a call. I have found their tech guys very helpful. I am not sure if Trymax is a Ray dealer.
    ROLL TIDE, ROLL.................

    Regards,
    Peter

  5. #5

    Re: cant read backup waypoints - Raymarine a65

    Thanks Peter,
    I will call sydney tomorrow, and yep ,Trymax are ,and are mobile too ( They are a long way from me!)
    Funny how the timing has worked out, still lots better than out at Fitzroy at night eh!
    Cheers
    Brendan

  6. #6

    Re: cant read backup waypoints - Raymarine a65

    Quote Originally Posted by peterbo3 View Post
    Give Raymarine in Sydney a call. I have found their tech guys very helpful. I am not sure if Trymax is a Ray dealer.
    Thanks Peter,
    They were very helpful indeed. Downloaded newer upgrade of navtech planner, and Bobs your uncle!
    All the points and routes are SAVED .Whew
    Cheers
    Brendan

  7. #7
    Ausfish Platinum Member bigjimg's Avatar
    Join Date
    Nov 2006
    Location
    Moorooka, Brisbane.

    Re: cant read backup waypoints - Raymarine a65

    Hey Brendan are the CF cards SanDisk? If not Raymarine recommends the cards be SanDisk cards.
    May pay to PM Jim McKinnon [captain rednut]He just fitted a Raymarine unit into my boat and he has a fella that
    is a Raymarine tech.Jim is a good bloke and may be able to help.Jim

    Oh, all sorted, good stuff.
    Last edited by bigjimg; 28-08-2012 at 09:54 PM. Reason: problem sorted out.
    Haines Signature "FinaLeigh" 580F 135 Optimax
    CH 81 & 72 VHF

  8. #8

    Re: cant read backup waypoints - Raymarine a65

    Quote Originally Posted by bigjimg View Post
    Hey Brendan are the CF cards SanDisk? If not Raymarine recommends the cards be SanDisk cards.
    May pay to PM Jim McKinnon [captain rednut]He just fitted a Raymarine unit into my boat and he has a fella that
    is a Raymarine tech.Jim is a good bloke and may be able to help.Jim

    Oh, all sorted, good stuff.
    Yep the cards were Sandisk. Apparently there size has been highlighted in the past as an issue, but my 1 Gb seemed to do OK
    Thanks for the heads up about possible raymarine Tech. I may follow that one up shortly.
    Thanks
    Brendan

  9. #9

    Re: cant read backup waypoints - Raymarine a65

    I Guess its worth asking if anyone has any ideas on the NO FIX situation.
    Raystar antenna is plugged in OK, unit is getting power. It is not exporting any Gps data either ( Logically I guess)
    Any Ideas?

  10. #10

    Re: cant read backup waypoints - Raymarine a65

    Hi Tenzig

    Try and copy the .FSH file into the 'archive' folder that is on your C drive, here is the address of mine 'C:\Program Files (x86)\Raymarine\Raymarine RayTech Navigator\Archive'. Then use the menus withtin the Raytech software to import from file (this folder is the default location it will search).

    Are you removing the card correctly from the A65? If not go through the menus and try that.

    Also as a side note im using a 4GB card and havnt had any issues with that apart from the usual gripe that the Raytech software is utter crap.

  11. #11

    Re: cant read backup waypoints - Raymarine a65

    Thanks Mick
    Yes the problem was the older version of Ray Tech I was running.
    Also I got a reply from the tech on the raymarine tech forum who suggested new aerial spliced in to NMEA in, not the GPS port. The guys at whitworths agree.
    As boat is in shop cant try anything yet.
    Cheers
    Brendan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •