Help me ID this fuel sender

[LoungeLizard]

Guys,

I'm trying to replace a buggered fuel sender but can't seem to find a suitable replacement. It's for a Suzkuki 34300-93J11 2" fuel gauge. From the link given the fuel gauge needs a sender with 250Ω maximum resistance. The thread at the top is approx 41mm diameter and the shaft (stainless) 210mm or 225mm including the thread.

Can anyone point me in the right direction?


Fuel Sender.jpg

[Muddy Toes]

MY first guess would have me looking at the Wema website.

[Aussie123]

What size is the thread.
Last ones I looked at were 1 1/4 BSP and were 200 or 225mm long

[LoungeLizard]

MY first guess would have me looking at the Wema website.

Cheers mate, it looks like you got it in one! Was the old WEMA model SU, now replaced by the S3U. Doesn't seem like the usual guys (Whitworths, BLA etc) stock the S3U. Other than importing directly from the US, can anybody recommend Aus supplier or replacement?

What size is the thread.
Last ones I looked at were 1 1/4 BSP and were 200 or 225mm long

Pretty sure it's 1.25" BSP, and the sender is 9" (225mm) if you include thread

[Aussie123]

It would be something like this one.

http://www.reeltackle.com.au/index.p...207&vendorid=3

[Muddy Toes]

Just buy from Wema USA direct mate,thats how I got mine.

[LoungeLizard]

It would be something like this one.

http://www.reeltackle.com.au/index.p...207&vendorid=3

Thanks, that looks like it'll do the trick

Just buy from Wema USA direct mate,thats how I got mine.

Would love to, but express post is $100!! ... or wait 6 weeks