I`m chasing a new piece of cutting board/ bait board , the white nylon stuff as mine has cracked on the all the screw holes , it`s 900 x 400 x 12 - 15 mm , can anyone point me in the right direction to get my hands on some of this please. cheers and thanks. Andrew
You could try a Perspex/ Plastics supplier/ repairer.
Cheers.
hospitality store. ( kenco in west end ) but get the 19mm ones they last longer and dont warp.
cheers fella`s will hunt some up.
A butchers supply should have the teflon type
best bet is to go to a proper plastics supplier, they can give you stuff that is UV resistant and will not crack and buckle in the sun, and will cut it to size for you, or buy a cheap cutting board and repace it now and then, which is probably a good option too.
Fish Gutz
The stuff you are after is High Density Polyethylene (HDPE). I got some to convert an ironing board into a filleting table.
You can get it from Australian Sheet Traders. http://www.australiansheettraders.co...?page=products
It isnt nylon, its actually HDPE. any half decent chandlery should be able to get some.
Mike
I'm picking up a new piece 550 x 1750 x 6mm today from Allied Bearings, I guess you'll have a store nearby???
it is a pretty common misnomer that cutting boards are "teflon" or 'plastic" but in fact it has almost nothing to do with Teflon, you need to buy "plastic" to suit what you want to use it for, there is stuff that suits wear and abrasion, stuff that is slippery (for trailers) there is stuff that floats and so on, that's why you need to go to a proper plastics supplier.
Collected the bait board today. Smooth surface, easy to clean, soft enough to prevent damage to the knives edges without leaving gouges, food safe, suits my needs!!!
i use king starboard offcuts
How much was it. Got a quote yesterday 1000 x 700mm $230Originally Posted by Stressless
Posting Permissions
Reply With Quote