I recently tried some Biltong and found it quite tasty, so thought think I'll have a crack at making some myself.
The first batch had just finished drying (longest few days I've had in a while) and is has ended up not to bad. I'm quite happy my first attempt wasn't a failure but there is definetly room for improvement.
So is there anyone who can give some advise how I can improve??
My method;
1. get some topside and cut into strips about 10mm thick.
2. place in container with salt for about an hour.
3. scrape off salt.
4. brush meat with vinegar.
5. sprinkle with pepper, coriander, paprika, chilli.
6. put in drying box for a few days till done.
my drying box was made in a hurry from a 600 x 400 x 200 s/s box with vents holes cut in the top sides and bottom front (don't ask why) covered with fly screen and a 50watt heater placed in the bottom. I also used a computer fan outside the box blowing at the bottom holes. meat was hung from s/s welding wire hooks.
now I'm going to have a few beers and sample the result.
I am quite keen to get better at this after seeing the prices people sell it for so any help is welcome.
Adam