Looking for a 2nd hand 150hp

[FishHunter]

I have decided to pension the old 150hp Johnson off and am in the market for a newer 2nd hand motor.
Thinking early 2000's and 2 stroke carby. Budget does not extend to anything fancier.

Any ideas where is a good place to look?

[rosco1974]

try knp marine down the goldcoast,he normally stocks everything from 20hp to 300hp lateish model outboards
cheers rosco

[FishHunter]

try knp marine down the goldcoast,he normally stocks everything from 20hp to 300hp lateish model outboards
cheers rosco

thanks. he has a 99evinrude 150 there. anybody intetested in taking a look for me? carton of your favourite in it if u do.

[Camhawk88]

Hey Fishhunter, just curious why the change over? Has the old Jonno bitten the dust or just after something newer?
I f it is still running well, I know those old Jonno and Rude 2 strokes keep going if you cop a good one, then why risk getting a 2nd hand one? I realise the budget restricts you to 2nd hand but if it were me and IF the current motor is still in good order I would stick with it rather than risk buying someone elses problems.
It may be that your current motor is stuffed and if thats the case then disregard this post entirely.

[FishHunter]

Hey Fishhunter, just curious why the change over? Has the old Jonno bitten the dust or just after something newer?
I f it is still running well, I know those old Jonno and Rude 2 strokes keep going if you cop a good one, then why risk getting a 2nd hand one? I realise the budget restricts you to 2nd hand but if it were me and IF the current motor is still in good order I would stick with it rather than risk buying someone elses problems.
It may be that your current motor is stuffed and if thats the case then disregard this post entirely.

Cons
1. its 30 years old
2. The tilt trim hydraulics have issues
3. The exhaust housing has corroded through
4. The cold start is horrendous despite new plugs and carb kits
5. The starter just karked it

Pros
Compression is 100 psi on all 6 and it runs well once you get it to start.

I would rather sink 4 or 5k into a newer lower hour motor than pump 1 or 1.5k into a 30 year old hand grenade

[Lucky_Phill]

PM sent.


phill
.
.
..
.
.

[FishHunter]

Thanks fone call made

[Spaniard_King]

PM sent.


phill
.
.
..
.
.

Thanks Phil I am onto it

[fisho64]

theres a 150 Yammy 2 stroke carby on Ebay, if you like them?

http://cgi.ebay.com.au/Yamaha-Outboa...item1c164b6710

[FishHunter]

theres a 150 Yammy 2 stroke carby on Ebay, if you like them?

http://cgi.ebay.com.au/Yamaha-Outboa...item1c164b6710

He is a ambitious fellow

[fisho64]

He is a ambitious fellow

haha-yeah thats what I thought as well! but each to his own. Theres also a 150 4 stroke for $6.5K that needs reassembling.

In the boat trader mag a few months back was an ad for "ex cray boat, excellent mech cond, possibly seized" or to that effect. Now THATS a salesman!

[cormorant]

theres a 150 Yammy 2 stroke carby on Ebay, if you like them?

http://cgi.ebay.com.au/Yamaha-Outboa...item1c164b6710

Counter rotator on a single rig, unusual, and only 150 hours from 2002. Gotta be a story behind that.

[julian1]

how much do you want to spend ?

[FishHunter]

maximum 5k