Hello all having trouble feeding the line up through the rod from the reel has anyone done this or know of any little tricks i am not doing all help appreciated cheers Adam
Hello all having trouble feeding the line up through the rod from the reel has anyone done this or know of any little tricks i am not doing all help appreciated cheers Adam
I had to use a couple of meters of fine single strand wire to feed mine through
A Proud Member of
"The Rebel Alliance"
The rod pulls appart its a 2 piece.
had the same trouble with mine, until I figured it was a 2 piece.
Regards
Honda.
Champions thanks guys
As well as pulling the rod apart, I also add a tiny swivel to the end of the line to act as a weight.
found it easy once you seperate the handle, used a tiny split-shot to thread line through top section. drop it in hole and blow it out tip.
Ahhh crap your kidding me, ther're a two piece???!
Ummmmm. Wish I knew it was 2 piece....
Sounds silly, but get some light braid (what was on the reel I used) and throw a few metres loose off the spool onto the ground, and stuff the other end in the vacuum cleaner and seal your hand around it, sucks the braid through in about 1 second... splitting it would be simpler but!).
Darren
dam... their 2 piece huh...
haha yeah I worked out mine was 2 piece after several stubbies worth of frustration with wire etc. The line or wire was running into the blunt end of the top section I think. Would be easy with it in 2 pieces I think
Cheers,
Myles
Posting Permissions
Reply With Quote