Simple NMEA connector - help?

[whiteman]

With all this wind around I'm gunna have a go at conecting the Furuno sounder to the Navman plotter via NMEA. There are about 5-6 wires to connect.

Has anyone found a nice little widget that makes this connection nice and neat? I'm thinking I could adapt the connectors used for the boat trailer to the car but is there a better way? Preferably don't want to use solder.

[finga]

Done
http://cgi.ebay.com.au/10-way-extra-...item3359214a0e

I use a fair few of these sort too and they're the bees knees
http://www.narva.com.au/products/bro...oof-connectors

Have fun

[battler1]

To Wires mate solder it yellow receive pos & green neg easy .

With all this wind around I'm gunna have a go at conecting the Furuno sounder to the Navman plotter via NMEA. There are about 5-6 wires to connect.

Has anyone found a nice little widget that makes this connection nice and neat? I'm thinking I could adapt the connectors used for the boat trailer to the car but is there a better way? Preferably don't want to use solder.

[borryking]

Have a look at these connectors:http://www.easternbeaver.com/Main/El...-HM/sm-hm.html They are also the ones that you use to do a Suzuki to SMIS/Lowrance NMEA connection.

[Heath]

Think you'll find that there are 4 wires to connect.

To Wires mate solder it yellow receive pos & green neg easy .

[kitty_cat]

these are pretty user friendly and idiot proof just push wire in and push button relaeses agent and self cuts into wire no stripping needed
i just find them easy for the small nemea wires

Printer-friendly format 3M™ Scotchlok™ 314 Electrical IDC, Pigtail, Moisture Resistant and Flame Retardant [click to enlarge] 22 to 14 (0,5-1,5) AWG, Blue, 1000 per bin

3M Order Code : 80-6102-5367-8
Bar Code : 0 00 54007 09231 5

[Bowser]

Is this NMEA2000 or NMEA0183 connection? The older 0183 is a relatively simple connect 2 wires, you just have to work out what the colours mean. If it is the 2000 then Maretron make a super simple field attachable connector that is simply a matter of putting the red wire in the red hole and screwing up tight. I used them to convert my older Lowrance blue connectors to the standard NMEA2000 connector. They are relatively expensive her compared to the States. But if you are only buying 1 then buy it here. You need to ensure you set a up a 2000 network correctly.