PHP Warning: Use of undefined constant VBA_SCRIPT - assumed 'VBA_SCRIPT' (this will throw an Error in a future version of PHP) in ..../includes/functions_navigation.php(802) : eval()'d code on line 1 side console conversion parts
i have an allycraft 425 reelmate with a yammy 30cv tiller. looking at converting it to a side console. just after a list of all the parts required and a rough price for them. i have a mate who can weld up the console and weld to the boat so just need to know what else i need like steering components and parts to convert motor from tiller to forward controlls. dont need any guages for the console either. any info and tips would be greatly appreciated! i am located on the sunny coast but can pick parts up from bris too as i work down that way.
Call a Yamaha dealer and they will give you a breakdown of cost
Rough guide
Control box $450
Parts to convert motor to forward control aprox $300
Steering arm $100
Cables $140
Steering kit $350
Wheel $50
Price the Yamaha parts as previously described and buy them.
Do not weld the consol to the boat. Weld in a floor frame to support it around a flanged base and bolt it down.
At the same time as the floor frame is welded in, weld in a seat mount tube and at least two conduit tubes - one to carry electrics and one to carry steering cable or hydraulic lines. If you want to rig sounder and radio and GPS on the dash later add an extra conduit tube with a length of aluminium welding wire in it ready to use to pull through the wiring.
This arrangement will ensure that you can get into the hull for maintenance and repairs.
side console conversion parts
Reply With Quote
