One has to observe the niceties of life doesn't one.? One cant be giving it up at the first whiff of fish![]()
One has to observe the niceties of life doesn't one.? One cant be giving it up at the first whiff of fish![]()
Has anyone used old life jackets stuffed into the areas in question?
Joe
don't do it unless you have removed all resembelence of it being a life jacket........otherwise you could be zipped for having "expired safety" equipment aboard.
and to make a significant difference you would need quite a few life jackets.... unless it was a kayak.
cheers
Its the details, those little details, that make the difference.
Thanks,
They would be in areas that would not see and the life jackets are new ones (basic $15) and surplus to my needs.
Thanks
Joe
I looked at EVA sheets today at Clark Rubber they have a range of densities,in thicknesses up to 25mm, The really dense stuff was rated at 250. Execise mats rate at 30-40, door mats at 90 ( $30/mt though)
Bias had tinny seat cushions, that rated about 50 but they were not stable if exposed to fuel/oil,,,,,,
The search goes on...
if you are looking for something fuel and oil resistant, you wont have may chioces... and you wont find those choices in a retail foam supplier.
cheers
Its the details, those little details, that make the difference.
As you are betting your life on it,why not use the best.
Polyethylene Foam
Easy to shape with a sharp carving knife.
Sticks like the proverbial if you use Marine Sikaflex(I had to remove a piece and it tore the foam ,it sticks so well)
The agents are
http://www.fgi.com.au/?q=one-stop-shop-trade-centres
Regards
seabug
Last edited by seabug; 25-07-2009 at 11:02 PM. Reason: product type
I know this is going to sound laughable, but many times over the years I've wondered how slightly modified old large gas cylinders would go welded/attached to the exterior of the gunnels. They could be foam filled and sealed for life. And they're gal.
Just a thought...............might be a stupid one though.
Dave
Cerytainly would keep you afloat
I offer to drive the "Wide Load "escort vehicle![]()
If you get me a good feed of Reds![]()
![]()
Cheers
seabug
hehehe!! Yeah it's sort of hard to describe what I had in mind. They actually be a bit below the height of the gunnels, with wide coamings encompassing them, if you know what I mean. If not foam filled, an air valve could be fitted and just check the pressure every time you fuel up.
Could even do it with a few 9kg bottles and make one a livewell
Dreams, dreams..........ahhh the medication begins to bite.
Dave
Dave you would want to be fast as a BBQ maker is using a lot. BBQ for the boat or heater for the overnighters ( no I won't have flames on boats)
http://www.ozpig.com.au/
Believe it or not ping pong balls are commonly used to keep a holed ship afloat by salvage companies.
all the gas cylinders I have lumped and humped would be a bit heavy for strapping to a boat unless it was a coal barge.
Gass cylinders in water float barely even when empty.
Ahh the old ping pong balls......definitely used by Daffy Duck and his three lads..... and proven as plausable by mythbusters ... but I have my doubts about an actulal commercial application.
the problem is they will leak out thu holes in the hull.
cheers
Its the details, those little details, that make the difference.
Don't forget bean bag beans - maybe we should all use those pool bean bags
Or better still, just keep one of those floating pool arm chairs in your boat.
As the boats sinking, just plonk your ass into the chair and float calmly away with a beer in one hand and your EPIRB in the other.
![]()