Results 1 to 3 of 3

Thread: Wobble Rollers

  1. 05-07-2009, 10:32 AM #1
    imported_QCR
    imported_QCR is offline
    Ausfish Bronze Member
    Join Date
    Aug 2003

    Wobble Rollers

    When replacing the wobble rollers do you buy rollers with the same centre ID as the OD of the shaft it is going on to or do you go bigger, eg 20mm shaft, 25mm roller
    Reply With Quote Reply With Quote
  2. 05-07-2009, 02:11 PM #2
    bigjimg
    bigjimg is offline
    Ausfish Platinum Member bigjimg's Avatar
    Join Date
    Nov 2006
    Location
    Moorooka, Brisbane.

    Re: Wobble Rollers

    The spindle or axle diameter could be 16,18,20,25mm which ever one you have just get the roller that fits the size spindle.For instance an 18mm spindle will accomodate a roller with 19mm hole not the one with 26mm hole as this will be too large and just not spin on the spindle all that well.So you need to be armed with the size of your spindle before you go shopping.Jim
    Last edited by bigjimg; 05-07-2009 at 05:19 PM. Reason: wrong terminology
    Haines Signature "FinaLeigh" 580F 135 Optimax
    CH 81 & 72 VHF
    Reply With Quote Reply With Quote
  3. 06-07-2009, 08:20 AM #3
    imported_QCR
    imported_QCR is offline
    Ausfish Bronze Member
    Join Date
    Aug 2003
    Thread Starter

    Re: Wobble Rollers

    Thanks for your reply Jim Ican go shopping now I know for sure.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Join us