NOTES FOR THE GUIDANCE OF CANDIDATES
USAGE
A Certificate of Competency as Coxswain (Restricted) entitles the holder to take charge of commercial and fishing ships less than 12 metres in length within specified areas of smooth and partially smooth waters and pilotage areas.
It is a dual deck and engineering certificate. Coxswain (Restricted) Certificates can be endorsed or limited depending on the service, experience and requirements of the candidate. Coxswain (Restricted) Certificates can also be limited to ships with outboard engines only if the candidate so desires. Further endorsements for other areas of smooth and partially smooth waters and pilotage areas can be added to these Certificates. Coxswain (Restricted) tickets may not be recognised between States.
TRAINING
To be eligible for the issue by a Maritime Authority of a Certificate of Competency as a Coxswain, the candidate must have succesfully completed an approved training program or course.Important Notice:
As from 1 July 2008, completion of Certificate II requires candidates to have tasks for each unit signed off by a qualified commercial master in the workplace. To achieve this it is essential that candidates are either in the industry or able to obtain at least part time casual work on a commercial or fishing vessel during their studies; and completion must be achieved within 18 months of enrolment.
Certificate II in Maritime Operations
TDM MF10 07B (or equivalent) - Senior First Aid (not available at AMTC)
TDM ME5 07B - Marine Radio Operator's Certificate of Proficiency
Elements of Shipboard Safety incorporating;
- TDM MF11 07B - Survive at sea in the event of vessel abandonment
- TDM MF54 07A - Observe safety and emergency procedures on a coastal vessel
- TDM MF55 07A - Fight and extinguish fires onboard a coastal vessel
Nautical Knowledge (Coxswain) incorporating;
- TDM MB45 07A - Monitor condition and seaworthiness of a small vessel
- TDM MC7 07C - Apply seamanship skills and techniques when operating a small commercial vessel
- TDM MC9 07C - Manoeuvre a commercial vessel less than 12 metres in length within inshore limits
- TDM ME11 07A - Contribute to effective communications and teamwork
- TDM MF32 07C - Apply domestic regulations when operating a small vessel
- TDM MH12 07B - Plan and navigate a short voyage within inshore limits
- TDM MR54 07B - Carry out re-fuelling and fuel transfer operations
- TDM MU5 07B - Ensure compliance with environmental considerations in a small domestic vessel
Engineering Knowledge (Coxswain) incorporating;
- TDM MR30 07B - Operate and carry out basic maintenance on a small vessel propulsion system
- TDM MR31 07B - Operate and carry out basic maintenance on auxiliary systems
- TDM MR32 07B - Operate and carry out basic maintenance on extra low voltage electrical systems, starter motors and alternators
Statements of Attainment attesting to the satisfactory completion of a competency based training program which includes the above units will meet Maritime Authority requirements..
OTHER MARITIME AUTHORITY PREREQUISITES
Candidates seeking a Certificate of Competency as a Restricted Coxswain should consult the MSQ "Notes for Guidance" at http://www.msq.qld.gov.au/qt/msq.nsf/index/nfg
To be eligible in general terms for the issue by a Maritime Authority of a Certificate of Competency as a Restricted Coxswain upon completion of training, the candidate must;
- have attained 18 years of age;
- pass a vision and colour-vision test;
- have completed a declaration of medical fitness;
- provide proof of required qualifying service;
- provide two recent (within one year) colour passport photographs;
- provide a recent (within one year) character reference;
- pay the prescribed fees;
- pass an examination conducted by the Maritime Authority..