carbon fibre sheet

[lippa]

anyone know where i can get a peice of carbon fibre sheet?
roughly A4 size. my new digital gauges for the honda have arrived so i need to pull the old dash out, and with the digi gauges ya only need 2 holes.

i can get alliminium no worries, or even perpex but i just like the look of the carbon fibre, plus it will match the finish on the gauges.

i have thought about a vinyl wrap. will use as a last resort over ally.

does anyone know where ya can get it to?

TIA

lippa

[wags on the water]

Lippa,
Try contacting Jack Erskine as they use cf for drag washers. You may get lucky there.

Wags

[jimbo59]

Try djr or stone bros racing they throw away alot of used c/fibre...jim

[Outsider1]

Found this company and address on a hobby forum, might be worth a call given they are on the northside;

http://www.truelocal.com.au/business...ty-ltd/geebung

Custom Carbon Pty Ltd

113 Delta St, GEEBUNG, QLD 4034

• Phone:(07) 3865 2014
• Fax:(07) 3865 2436

Cheers

Dave

[Scott nthQld]

Any costom Auto body shop should be able to get you a peice, and there isn't exactly a shortage of those around Brisbane.

[Roughasguts]

Try a model shop, you know ones for building toy R/C boats and planes.

[Noelm]

contact Pete (grand marlin) he does it in all sizes and shapes.

[Local_Guy]

there's a shop in brisbane, i think it's called Custom Carbon from memory.. i could be wrong.


but they are up near the Arnotts factory at Virginia.

also, when you do your cf work, make sure you get epoxy or resin that DOES NOT turn yellow in sunlight, or your nice CF dash will turn yellow in months.

[lippa]

cheers fellas, im getting one mad outa ally, im going to paint it in a black pearl

was a mission to track cf down!!!!!!!!!!!!!

thanks for all the sugestions

cheers

lippa