What height is your targa from the deck to under the main cross rail.
I am a short arse,and will need to put rods into the launcher. Would like to know if your canopy is one you can stand up straight,or have to crouch a little?
David
What height is your targa from the deck to under the main cross rail.
I am a short arse,and will need to put rods into the launcher. Would like to know if your canopy is one you can stand up straight,or have to crouch a little?
David
OK,so you all missed this,because you watched the Broncos.
So I will try again( LOL)
David
Hi David
The average guy is about 1.8m so you need about 100mm more under the lowest rod but that hangs down to be on the safe side. I have a decky that is 6ft4 and he has a permanent scar in the middle of his forehead and he sounds like the misses every time he bitches about it
IFISHCQ2
ifishcq1,
Thanks for thinformation.
The canopy I am replacing is 1653mm from the floor,and slopes down to the screen,old design type.
More like getting into a MV
David
Mine is 2.1mts floor to underside targa
Mike
David, make it a decent height and get yaself a plastic stool to step on toget the rods up and down I know of a few people who do this
Garry
Retired Honda Master Tech
OK That gives me somewhere to start
Thanks
David
A decent placcy eskie and you can step up. Nothing worse than knocking your head.
kev
See my breeder fish photography here: https://kevindickinsonfineartphot.sm...opical-Fish-2/
Quality digital copies free to Ausfishers............use as wallpaper or can be printed......size up to 20 x16. PM for details.
I recon 6 foot 6 inches would be a good minimum height.
I'm 6 foot 4
Chris
i pick the tallest of the crew and add 75 to 100 mm. in most cases thats great, but with most guys garaging their boats these days any height they want can be manufactured. as stated i would invest in a large esky ...ian