Speciallist Skeg Welder

[Whitto]

After some advise and recommendations for a Specialist Welder, Unfortunatedly the bottom 2" of the skeg has been broken off and is bent about 5 degrees off the vertical, (50hp Honda about 2yrs old), It would be preferred to get someone on the Northside, A business address and P/No if possible, Much appreciated, Cheers Whitto

[Spaniard_King]

Whitto,

don't concern yourself, you will not loose any performace but you have increased the risk of damaging your prop. Just remember every time you weld alluminium it gets softer and will be more suscseptable to snaping again.

I would be leaving it until you are about to sell it, then get it fixed.