Results 1 to 8 of 8

Thread: Bumping from engle 40L

  1. #1

    Bumping from engle 40L

    When I carry my 5 year old engle the motor bumps around like it is loose, anyone had this happen and was it an easy fix if you did it yourself? Something just loose or a replacement part needed?

    Thanks fnq



  2. #2

    Re: Bumping from engle 40L

    I not up on the engles but i would have a look at the motor mounts.
    they should be like a cusion they could be shaged

    neil

  3. #3

    Re: Bumping from engle 40L

    Thanks Neil, if it is, hope they only need tightening or something just as simple.

    cheers fnq



  4. #4

    Re: Bumping from engle 40L

    Hi, Mine bumps when I pick it up as if the motor is loose & moving to one side & gives the odd bump as I carry it. Been doing it for the last 25 years so I have long ago stopped worrying. Still runs fine. Bill

  5. #5

    Re: Bumping from engle 40L

    I think that is the "beauty" of the swing motor

  6. #6

    Re: Bumping from engle 40L

    mine has done it for 15 years, its how they are. all is good

    they rattle around a bit when 4WDing

  7. #7

    Re: Bumping from engle 40L

    Ok thanks fella's will leave it alone.



  8. #8

    Re: Bumping from engle 40L

    most compressors have internal springs to protect the internals and keep vibration to a minimum. Usually a bump is just the gizzards moving on the springs..no need for alarm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •