Faulty Taco?

[PeteM]

Hi Guys,
Checked the settings, it was on 6P. I pushed a couple of wires around. There was a round rubber stopper with 3 wires going thru it. I was able to push this in about 1/4 inch. Started the motor up, and hey presto......problem solved...tacho now works fine. Should of had a good look at it first, just assumed it was a major fault.
Thanks for all the input.
Cheers,
Pete

[dnej]

Yahoo.
Pays to ask ,and probably saved you a packet.Well done Pete.
Congrats on the new arrival, by the way.
David

[BM]

Good stuff Pete.

[finga]

Yep Goodo
The things you find when you have a poke around

It would be interesting to know which wires were unplugged to cause this problem just for future reference.

[dnej]

Finga,
Hey now,that is food for thought.What about letting us know Pete.
David

[PeteM]

Hi Guys,
Attached is a pic of the rear of the taco. It was the black stopper with the blue and black wire coming out, that had worked its way loose. It least i know what to look for if it happens again.
Cheers,
Pete