Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: xd 100 oil for E-Tec

  1. #1

    xd 100 oil for E-Tec

    Im out of oil, plan to get a service done soon as a quick check but will be going out before then i think....I got my Last oil with my 30 hour check i had done at bribie boats, anyone know if northside marine or sundown, or cunninghams stock xd 100 to save a drive?
    ..Greg...."Termites pay the bills"..... Trailcraft 475...75 Hp E-Tec

  2. #2

    Re: xd 100 oil for E-Tec

    Hi, i know Leisure marine at Capalaba should stock it not sure if this would be out the way for you.
    how much oil is yours using mine is a 150 get about two tanks to a bottle.

  3. #3

    Re: xd 100 oil for E-Tec

    I have a inspection to do thur arvo at tingalpa...will drop in there then....mine just sips the stuff...ive only used 2 i think, i cant remember buying the last one....ive done 79 hours......im sure i bought the 2nd one when i had it checked at about 35 hours>>.
    ..Greg...."Termites pay the bills"..... Trailcraft 475...75 Hp E-Tec

  4. #4

    Re: xd 100 oil for E-Tec

    I seam to be using a fair bit more the you do. Why did you have it checked at the 35 hour mark?
    Any other e-tec owners of larger outboards use much of the oil? it would be good to know.

  5. #5

    Re: xd 100 oil for E-Tec

    REEL CRUISY i run a 200H.O and with 40+ hours on it i am only on my third bottle. How many bottles have you used to what hours.

    Damien

  6. #6

    Re: xd 100 oil for E-Tec

    Hi Damien i would be on at lest 7 or 8th bottle and done 85 hours.
    Not sure if its using a bit much or not but sounds about right with what you said.
    Will have a talk with the dealer this week, burning a 160lt of fuel for about 180km
    Last edited by REEL CRUISY; 14-08-2007 at 08:33 AM.

  7. #7

    Re: xd 100 oil for E-Tec

    Quote Originally Posted by REEL CRUISY View Post
    Hi Damien i would be on at lest 7 or 8th bottle and done 85 hours.
    Not sure if its using a bit much or not but sounds about right with what you said.
    Will have a talk with the dealer this week, burning a160lt of fuel for about 180km
    Thats about twice what my 175 uses. Get the oil calibration checked.

  8. #8

    Re: xd 100 oil for E-Tec

    Any other e-tec owners out there with figures on how much xd 100 they use?

  9. #9

    Re: xd 100 oil for E-Tec

    From another topic

    Re: 2 Stroke Oils-Are they really different?
    Hi Have just heard that BRP has imported 200 liter drums of xd100. Put some pressure on your local Evinrude dealer to get one and get them to refil your existing 1 gallon drums. They should be able to sell it to you for about $50- $55 a us gallon and still make money. Very good oil with loads of anti carbon and a full synthetic designed for marine use now at an OK price.

    C

    Also if you are comparing oil consumption with an ETEC make sure you also add the boat ,weight and revs you usually run at or % time trolling. The ECU in a ETEC has an oil fuel map that changes dependant on how much load the motor is under. Varies the oil mix at different revs / load.

    Would like to see the figures as the XD100 on my calcs works out at about a max of 20 cents additional per litre of the fuel cost.

  10. #10

    Re: xd 100 oil for E-Tec

    I had a check done on mine as peace of mind thing,they put her on the pc and i have a printout of things, it was at the time they had a recall on some little dohicky..so seeing it was there .....im going to get one done soon either 12 mths or 100 hours...drop the leg and do an oil change....and a once over......but one thing is for sure, my 75 uses bugger all oil
    ..Greg...."Termites pay the bills"..... Trailcraft 475...75 Hp E-Tec

  11. #11

    Re: xd 100 oil for E-Tec

    The other weekend i used 45L of fuel and i only needed to 250ml of XD100 topup happy so far. If you motor is using too much your motor might be programed for normal stroke oil.

  12. #12

    Re: xd 100 oil for E-Tec

    STEVEN78, my motor is supposed to be programed to run on xd 100 but might be in run in mode still will talk to my dealer soon to run a check on it.

  13. #13

    Re: xd 100 oil for E-Tec

    Reel Cruisey,

    you might have had the same problem as I was having with the 200 I borrowed. No way in the world was it getting anywhere near 100:1 oil consumption on XD100. The owner never told me if had a problem as it was due for a service when I gave it back to him.

    http://www.ausfish.com.au/vforum/sho...ighlight=xd100

  14. #14

    Re: xd 100 oil for E-Tec

    Hows it going guys
    What is the go with the price of this stuff i bought 19L today and cost me near on $300

    Russ

  15. #15

    Re: xd 100 oil for E-Tec

    I have just bought a new Haines Hunter 580 Breeze with a 150 ETEC on it. Have just gone through 4 litres of xd 100 with three full tanks (160lt). Still costs $80 for 4 litres up here on the Sunshine Coast. Is it much cheaper elsewhere ????

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •