I pulled up to the ramp in me boat a few weeks back and there was this bloke and his wife trying to get his boat on the trailer with not a lot of success. I asked what the problem was, and he said broken winch, so I offered to help.
I unhitched the trailer off me 4b and put the reciver tounge and ball on the attachment on me bull bar. Mean while he took off his trailer and hooked it to the front of me bullbar. Nosed his trailer down to the ramp and used me elec 4x4 winch to winch on his boat and then reversed up the ramp and attached it to his car. hooked up my trailer to the rear of mine again and went got the boat out and was thanked once again for helping out.
The story was, while winching the boat on it sliped off the roller and weged itself and he then broke the winch. His trailer was not designed to drive on and he had tried this without success. When we had loaded it I looked and all his rollers were out of alignment so I told him how to fix the problem. I then told him how to fix his winch witout buying a new one which he was about to do. He had only jus brought the boat and was new to boating so with a litle advice from me he is now the wiser.