furuno4100 help please

[russ81]

Hows it going guys
i was wondering if there is anyone that has a furuno 4100 on there boat that i could use to test my monitor as i am having probs with my unit and im unsure if its the monitor or the transducer
Thanks in advance
Russ

[deadbeatloser]

yeah m8 im in caloundra .feel free ph 0407938036

[craigie]

Russ,

Bring it around, I live at Wynnum, Brisbane Bayside.

PM me.

Cheers
Craig.

[SgBFish]

Mate I'm at Margate. 0439848717

[russ81]

Thanks for the offers guys would it please be possible for you to post pics off your screen before i start wasting peoples time
Cheers
Russ

[sik008]

if it is ur transducer start moving it around because it might be getting turbulence.
Thats what was wrong with ours because the guy put it in the wrong place...

cheers alex

[russ81]

Hows it going mate
I thought of that but it happens when the boat is stationary as well
Cheers
Russ

[pegasus]

Russ,
m8 I dont have a furno 4100 but may I suggest you give furno a ring- I think taylor marine are there contact local- I will try an confirm tomorrow and get back with to you with a number. They are a very helpful bunch and I am sure there s a techo there with an answer.
best regards,
lew

[russ81]

i have attached a pic of the transducer (the one on the right)

[pegasus]

Russ,

Taylor Marine ( furno)- murrarie -phone number 33978733

[russ81]

Hows it going pegasus

Thanks heaps for that i really appreciate the help
Cheers
Russ

[SCOTTYGC]

i have that sounder and it wouldnt turn on

sent it to taylors in brisbane he checked it out for me and it was the power cable

bought a new cable from them and posted back within a week

i think they only charged me about $20 to check it out

very happy with the service

your transducer looks a little high

[SgBFish]

Russ.
Here is my P66 position. I have since lowered it 3mm because it wouldn't read at speed.
You position looks good. I have some screens photos fromthe weekend bu the glare is really bad. I will try and post them tonight anyway.

Scott

[SgBFish]

Russ here are the photos.
They are hard to see because of refection. If anyone knows how to take photos from a sounder please let me know?
If you can make them out.
I run mine on maximum speed 4/1 and fish mode as well as increasing the Gain as much as possible without blacking out for the depth i am fishing in. I also push the bottom down to the bottom of the screen using the range function.

The first photo is in 20M of water on sand bottom running in single 200Khz mode.
The second photo is in 10M on Coffee rock. The right hand side is the 200 Khz mode while the left is with the marker zoom set on the bottom. This is a useful feature. In this photo there are fish near the bottom and mid water. There were sweatlip, wrase, squire and cod at this site.
I hope this helps. I hope to get out this weekend and take some more for you.
Let me know if you want to bring yours around.
Cheers,
Scott

[russ81]

Hows it going SgBfish
Cheers mate
The display on your screen is about 100x better than anything i have ever seen on mine .
I have a feeling it has something to do with the transducer so im going to get it checked out .
Cheers
Russ