-
Ausfish Silver Member
lure problems
i bought a new brim lure and wen i cast it goes nowhere ?should i get some light braid(6lb) or if i put a pea sinker on frount of the lure wil it change the lure performence....???
any ideas?
cheers,jamie
-
Ausfish Gold Member
Re: lure problems
g'day jamie
can you tell us a bit more like what rod , reel , braid or mono you are using and if you run a small sinker in front of any lure it is sure to impeed(sp) the action in some way.
cheers swano
-
Ausfish Gold Member
Re: lure problems
Hey Jamie
Agree with Swano, we need a few more details to be able to help you out. But sounds like you may be fishing far too heavy line on a rod that may be too heavy for light bream fishing. Or perhaps you need to top up the spool so that the line sits just below the lip of the spool, that might help.
-
Ausfish Bronze Member
Re: lure problems
also the rod length makes a difference
NEVER SAY NEVER
-
Ausfish Silver Member
Re: lure problems
lenth 7ft,line 12 pound, reel cheepie jarvis walker(platic reel)thanks
-
Ausfish Bronze Member
Re: lure problems
Sounds like the line is to heavy try a 4 or 6 lb and i do agree top up the spool this will help If the runners are to small this will also restrict the line flow
cheers
-
Ausfish Platinum Member
Re: lure problems
Also try slowing down your retrieve.
Im sure if its spinning its too fast, and if its swimming to one side then the bib might not be lined up?
Matt
-
Ausfish Silver Member
Re: lure problems
thanx for the advice guys
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules