help with double roller rod

[jtpython]

Can someone help me with where to run the line thru a double roolered eye on a rod wether it is under and over first or under and thru leaving one roller free? need help plz

[Blackened]

G'day

Just run the line straight through the middle of them

Dave

[jtpython]

Just didn't look right when i done it lol, have inclosed pic if roller, Has anyone used these for bottom bashing or are they more suited to trolling.

It seems to put the line in at an angle then runs straight thru to other rollers thought this might take up some of the bite pressure going thru the rod?

[Blackened]

G'day
They are much more suited to trolling, for the high speed stuff as the line is rolled through the guides, as opposed to being pulled through a normal guide, less friction on the line in this case.

If youre still unsure about the way the line goes thorugh, have a look through the rod building section for more hints.

Dave

[jtpython]

Thanks Dave, Bought a brand new 25 kg set up from ebay for $ 13 Plus $19 for postage couldn't pass it up

[1rabbit]

Have only used roller tips for bottom bashing, & what a pain in the @rse, even 80lb braid will slip down the side of the roller,
I cut all mine off.

Muzz