4m hornet trophys

[yamp]

looking into storage options for deepcycle battery on my 4m hornet ,thinking below floor like start battery, any advice or pic of other member greatly appreciated cheers Yamp

[Fishin_Dan]

JT has one of these. He should be able to help you out.

[JT]

G'day Yamp,

I have my cranking battery in the spot under the floor and the deep cycle for the electric in a battery box that sits on the floor just in front of the extension I did to the front casting deck. The battery box is held down with a strap. I am at work at the moment, when I get home I'll post up a pic for you.

Cheers

John

[JT]

Hey Yamp,

Here's the pic, you can get the box and strap from any chandlers.

Cheers

John

[yamp]

thanks for the replys jt and dan,I had a similar set up with box screwed to floor but was thinking of doing something like the cranking battery box to get it out of the way ,looks like you have modified your casting deck jt?looks good any pics thanks again Yamp

[JT]

No worries Yamp - what I think I'll end up doing is extending the casting deck further back but having the front open so I can keep the battery under the extension and slide tackle bags and things under and out of the way. Here is a link to some some picks of the reno from and old post. - http://www.ausfish.com.au/vforum/sho...00+hornet+reno

Hope that link works - if not just do a search on 400 hornet reno.

Cheers

John

[TheSaint]

This is a photo of the batteries in my 390 Hornet..

[yamp]

jt I have tried to view photos of your reno with no luck If you get a chance could you post some pics ,thinking of framing in a box in floor like cranking battery box, thanks again Yamp

[JT]

Hi Yamp,

Sorry for the delay, here are some pics.

John

[yamp]

thanks for the pics jt yamp