PDA

View Full Version : still having trouble getn photo on



HOOKLINEnSINKER
06-12-2005, 10:45 PM
question....it says max attachment 100kb. do i ajust that on the pc or the camera before i take the shot?

Sportfish_5
06-12-2005, 10:51 PM
Resize the pic in Ifran View after u download them - leave the camera in normal settings

http://www.irfanview.com/


Greg

HOOKLINEnSINKER
07-12-2005, 12:01 AM
I WENT TO IFRANVIEW BUT TOO MANY OPTIONS. DO I DOWN LOAD ONE OF THEM. caught a spanish mack yesterday cant do a small report as cant download the frign thin gggggrrrrrg

scuttlebutt
07-12-2005, 07:41 AM
Daniel, check in the "Help" section. It's pretty easy once you download the Irfanview program.

cheers,

steve

Bad_Bubby
07-12-2005, 10:22 AM
I use Adobe photoshop and miscrosoft paint. Follow these steps...

1. Upload pic(s) onto computer.
2. Open your pic in Adobe.
3. Save pic on 'medium' definition (it automatically comes up after you choose to save). Cropping can also be done here.
4. Re-open file in paint.
5. Select 'image'.
6. Go down to 'scetch and skew'.
7. Customise pic as required, I find a 30/30 percent size reduction is good. File size should now be under 70kb.
8. Upload onto ausfish.

Volvo
07-12-2005, 12:26 PM
hookline n sinker
If your still havin probs try the following mate.
Download your irfanviewe to your desktop.
Activate it by double clicking on it and go to
File
Open
and open the photo /image you wish to resize.
Go to Image on top of page and click on the resize/resample.
fill out the Width box to whatever size to give you the 100 you are after depending on the size of your file.
Say 400 and the height box should automatically fill itself in.
DPI normally set at 72dpi .
Units in pixels
Hit okay
Name file and save to whichever folder you wish to save it in.
Save
Bob should be your uncle:)..
Want the Piccie to be a tad shqrper n clearer you can make the DPI to 300 and go to image /sharpen prior to saving but get about to learning how to resize your image first and worry baout the rest later..
give it a burl n see how you go??..

imported_admin
07-12-2005, 03:15 PM
Have a read of this thread

http://www.ausfish.com.au/cgi-ausfish/yabb2/YaBB.cgi?num=1075561453

HOOKLINEnSINKER
10-12-2005, 09:46 PM
ok ive been resizing the pictures it i get them from the browser as it says then it down loads .it says done. but nothing happens. it says notice: if you had an attachment in your post, you will need to reselect the attachment again in browser box for security reasons.
its bloody frustrating

HOOKLINEnSINKER
10-12-2005, 09:51 PM
take 100

HOOKLINEnSINKER
10-12-2005, 10:02 PM
test 101