Daiwa TD SOL 2 4000H Bearings

[doggy39]

Hi just enquiring if anybody would know the bearing sizes of Daiwa TD SOL 2 4000H thanks looking to replace some bearings in it.

Thanks Greg

[Rodman]

All u have to do is go to Daiwa web site for reel schematics for your TD SOL and get the part numbers and ring Daiwa with the info and make sure u have your Visa ready and place your order and the will send u the bearings.

ken
Frazorodz &Reelz Repairz
0427832618

[doggy39]

Thats what i was trying to avoid i wanted to buy the bearings eleswhere .

Greg

[bluefin59]

Thats what i was trying to avoid i wanted to buy the bearings eleswhere .

Greg

For what ever reason you don't want to useDAIWA get the bearing no from the site then go to bearing services if your in Brisbane and they will be able to sell you something the same ...Matt

[col]

Wouldn't buy non genuine. The oil viscosity will probably be thicker ultimately reel will be stiffer to use. Had this problem with a tld shimano




Sent from my iPhone using Ausfish forums

[bluefin59]

I would agree with Col ,I am a big DAIWA user SOL 2500, saltiga s extreme 4500 , 2 certates , and a 3000 tier ra and the only problem I had was a bail arm roller and after that I ALWAYS oil the out side bearings and service them occasionally and have never had bearing failure since . Matt

[Rodman]

All u have to do is go to Daiwa web site for reel schematics for your TD SOL and get the part numbers and ring Daiwa with the info and make sure u have your Visa ready and place your order and the will send u the bearings.

ken
Frazorodz &Reelz Repairz
0427832618
Mate the only way to replace bearings is to dismantle the reel and measure the width, inside diameter and the outside diameter as the bearings maybe all different sizes.

ken

[Aussie123]

I have a heap of new ceramic hybrid bearings here so if you can find out the sizes, I can see if I have the correct ones.

[doggy39]

thanks will just measure them.

[Aussie123]

thanks will just measure them.

These are the siezes that I have here.
3x10x4mm
3x6x2.5mm
3x8x4mm
4x10x4mm
4x11x4mm
4x7x2.5mm
4x8x3mm
5x10x4mm
5x11x4mm
5x8x2.5mm
5x8x2mm
5x9x3mm
6x12x4mm
7x11x3mm
7x13x4mm
7x14x5mm
8x12x3.5mm
8x14x4mm
8x16x5mm
8x19x6mm
9x17x5mm
10x15x4mm
10x22x6mm
12x18x4mm
12x21x5mm