Hi from the uk

[Toomany]

Hi, just joined your great forum as I have purchased my first ever tinnie (they really are not popular over here) and I wanted to hear first hand about them and found some threads of interest to me, also as it is a bare hull I will be finishing it myself and hopefully get some good advice and ideas from you all.

Rob.

[Mike Delisser]

I recon fitting out a tinnie is almost as much fun as fishing out of it.

[Toomany]

I recon fitting out a tinnie is almost as much fun as fishing out of it.

I hope so, it will be a challenge as never worked with ally before, all my previous boats have been grp.

114210

[Funchy]

Welcome Toomany

Hope the fitout goes well mate. Suggest you start a thread and track your progress. Would be good to see how you go and a good way to get feedback from those that start to follow your progress.

[Mike Delisser]

You may already know, but one thing to keep in mind is to be carful wherever you have a different metel making contact with the hull.

[Toomany]

You may already know, but one thing to keep in mind is to be carful wherever you have a different metel making contact with the hull.

Yep, I have been reading up on it and looking at ways to isolate different metals (nuts, bolts screws etc)

[Toomany]

Welcome Toomany

Hope the fitout goes well mate. Suggest you start a thread and track your progress. Would be good to see how you go and a good way to get feedback from those that start to follow your progress.

yeah I did consider that, wasn't sure you guys would be very interested in our attempts over here though.
could certainly welcome some advice and feed back though, so may start a thread and see what interest it gets.
Rob.

[TruBlue]

Hi Rob
It floats so we r interested [emoji3]


Sent from my iPad using Tapatalk

[Toomany]

Hi Rob
It floats so we r interested [emoji3]


Sent from my iPad using Tapatalk

Hi and thanks, thread now started in the boating section,

would welcome input from you guys who have the experience with these boats.
Rob.