penn 209 rebuild - 12/27/09

[alantani]

penn 209 rebuild - 12/27/09
this is another post that is long overdue. here is our reel, a basic, stock penn 209.
http://alantani.com/gallery/1/1_23_12_09_6_37_50_1.jpeg
http://alantani.com/gallery/1/1_23_12_09_6_37_49_0.jpeg
http://alantani.com/gallery/1/1_23_12_09_6_37_51_2.jpeg
we're going to start with the left side plate. all we have to do be back out each of the left side plate screws (key #'s 32 and 38), one at a time.
http://alantani.com/gallery/1/1_23_12_09_6_37_52_3.jpeg
add a bead of grease to each screw or screw hole, but do this one screw at a time.
http://alantani.com/gallery/1/1_23_12_09_6_37_53_4.jpeg
now back out each of the right side plate screws (key #32 and 38) and set them aside.
http://alantani.com/gallery/1/1_23_12_09_6_38_51_0.jpeg
at this point, the reels separates multiple pieces.
http://alantani.com/gallery/1/1_23_12_09_6_38_52_1.jpeg
lightly grease the clamp screws (key #34), then reassemble the rod clamp assembly.
http://alantani.com/gallery/1/1_23_12_09_6_38_54_2.jpeg
http://alantani.com/gallery/1/1_23_12_09_6_38_55_3.jpeg
this reel is not going to win any distance casting competitions, so we'll lube the left side bushing (key #40) with corrosion x.
http://alantani.com/gallery/1/1_23_12_09_6_38_56_4.jpeg
install the spool (key #29L) back into the left side plate assembly (key #27) and set it aside.
http://alantani.com/gallery/1/1_23_12_09_6_42_07_1.jpeg

[alantani]

here's the rest of the post.......

http://alantani.com/index.php?topic=659.0