View Full Version : S / S or Alloy Prop
Wahoo
15-06-2007, 06:52 PM
hi All, just picked my new prop,
now, one is alloy and one is a stainless steel prop, can you tell which is which,
one is a 19p and the other is ????
Daz
http://img.photobucket.com/albums/v647/4xgold0/100_2600.jpg
http://img.photobucket.com/albums/v647/4xgold0/100_2596.jpg
http://img.photobucket.com/albums/v647/4xgold0/100_2594.jpg
saurian
15-06-2007, 06:57 PM
Ok , the one on the left is ali.
As for pitch ??? The stainless one is pretty swept back.
How'd I go ????
Ta
saurian
15-06-2007, 07:00 PM
Crackerjack , me thinks 19 pitch on the right ( stainless) and 15/17 pitch ali on the left.
Sorry to post twice but got me going...???
Ta
FNQCairns
15-06-2007, 07:03 PM
Yep I am with Ta :) above, heaps of rake in the SS prop, is it a tempest? if not what merc props are they?
cheers fnq
FNQCairns
15-06-2007, 07:05 PM
I will post twice also, suspect both have same pitch.
cheers fnq
Mercury16
15-06-2007, 07:05 PM
in the second pick they are swapped around, so do you mean the left one in the 1st pic?
FNQCairns
15-06-2007, 07:11 PM
Right on last pic is SS for my guess.
saurian
15-06-2007, 07:12 PM
Crackerjack how many cans have you had ?????
Thanks merc 16 , I think I havn't had enough cans now...
I think it is the 2nd picture, yes 2nd picture is the one I judged it off.
Crackerjack you are just a mongrel at times....
Ta
saurian
15-06-2007, 07:18 PM
Crackerjack , hubs seem to be of different sizes ????
Have you been shopping at the boatyard again ????
Ta
Wahoo
15-06-2007, 07:31 PM
LOL you guys crack me up, and now im confused :-/ :P
righty, first pic
L is alloy 19p
R is S/S 19 p
mmmmmmmmmmmmm..................................... ........................... yeh thats right ;D
Daz
saurian
15-06-2007, 07:34 PM
So Crackerjack I was totally wrong.
Thanks a lot , or are you confused , sure it wasn't alloy left 2nd picture or did you use 6 different props ???
Ta
Wahoo
15-06-2007, 07:39 PM
So Crackerjack I was totally wrong.
Thanks a lot , or are you confused , sure it wasn't alloy left 2nd picture or did you use 6 different props ???
Ta
LOL now stop it..................
i had to go and look at the pics again :o:o
Alloy on R 2nd pic :D
Daz:-/
Wahoo
15-06-2007, 07:46 PM
Scott, in the first pic the L is the new Alloy X7 Enertia 19p
R prop is the S/S Laser ll
Daz
Wahoo
15-06-2007, 07:50 PM
Crackerjack , hubs seem to be of different sizes ????
yes,,,,,, and if fnq explain why please,,;) as i have no idea :-/
Daz
saurian
15-06-2007, 07:53 PM
Crackers , don't you mean first picture ????
I'm sure ????
Sounds like you 2 are ganging up on me now ...????
Ta
FNQCairns
15-06-2007, 08:08 PM
Think one has an exhaust ring/flare, I am too poor to test such lovely boat bit's, would be great to hear how they stack up against each other, never seen the new ultra thin alloy props in the flesh.
cheers fnq
saurian
15-06-2007, 08:17 PM
So crackers , you bought 2 props and you have to ask thanks as to why one has a bigger exhaust outlet ?????
FNQ, ultra thin ???
Wouldn't it flex to much under load ?????
Ta
Wahoo
15-06-2007, 08:28 PM
So crackers , you bought 2 props and you have to ask thanks as to why one has a bigger exhaust outlet ?????
FNQ, ultra thin ???
Wouldn't it flex to much under load ?????
Ta
no, motor comes standed with a S/S prop, Merc was not happy with the WOT rpms, 5750
so we just change the props till we are all happy,. these props are up grades from the standred S/S prop i will have to give one back, the Enertia X7 is 4 times more durable and 30 % stronger than conventional S/S
saurian
15-06-2007, 08:36 PM
Sounds like alloy is progressing , how do they make it thinner and stronger ???
Seems to defy logic ..
Ta
Wahoo
15-06-2007, 08:39 PM
Sounds like alloy is progressing , how do they make it thinner and stronger ???
Seems to defy logic ..
Ta
not sure,
ENERTIA
Designed for both outboard- and sterndrive-powered boats, the Enertia is cast from Mercury’s X7 Alloy. According to Mercury engineers, it’s four times more durable and 30 percent stronger than conventional stainless steel. The stronger metal allows for a prop with thinner blades and higher rake angles, which increases speed and fuel efficiency during acceleration and at top speeds. Mercury says that using this prop can be equivalent to adding an additional 30 hp. Enertia is available in 1-inch pitch increments from 14 to 22 inches in standard rotation. And, counter-rotation models are available in 15-, 17-, 19- and 21-inch pitches to fit many twin- and triple-engine boats.
Mercury16
15-06-2007, 08:44 PM
Cracker,
Do you own that Verado?
Wahoo
15-06-2007, 08:48 PM
Cracker,
Do you own that Verado?
the one in my avatar??
yes ;D
Daz
Mercury16
15-06-2007, 08:51 PM
BLIMEY!, are you serious!
what a machine, thats somthing to be proud of.
cheers Pete
saurian
15-06-2007, 08:53 PM
If the 30 hp applies to 90 hp donks I think I had better buy myself a pair..
How many million as fnq has bailed already...
I havn't ( note) got 2 verados so how many kilo's of prawns is one worth ???
Ta
FNQCairns
15-06-2007, 08:57 PM
Saurian, I dunno what it is made of, daz's post is about the limit of my knowledge on them, considering the price of good props and mercury makes VERY good prop's it could contain titanium for all I know:(
cheers fnq
revs57
15-06-2007, 09:56 PM
ahahhahahahahhaha
Spaniard_King
16-06-2007, 07:32 AM
Daz,
how much for the new Enertia??
cheers
Garry
Wahoo
16-06-2007, 08:08 AM
Daz,
how much for the new Enertia??
cheers
Garry
Hi Garry, im not to sure on the outright price on this prop, when i brought the Verado it comes standard with a Vengeance ( POS ) so i upgraded to the Laser ll for an extra $50, then i upgraded again to this one, again for an extra $50
what i like about the Enertia is they step up in 1" increments
if your looking for propping your new boat, ( not long now;D ) it would also pay looking at the Tempest plus props,
i have read good reviews on this prop also
cheers
Daz
FNQCairns
16-06-2007, 11:28 AM
Daz who do I talk to? a $100 dollar upgrade from my SS Yam prop for an enertia sounds good, don't have to be in some sort of club or the like do I?:)
cheers fnq
Mercury16
16-06-2007, 12:09 PM
Cracker,
do you know much about the trophy sports props. or heard any good reviews about them??
Pete
Wahoo
16-06-2007, 06:49 PM
Scott, just like that ol saying...............you shoulda brought a merc...LOL only kidding;D;)
Daz
Wahoo
16-06-2007, 06:54 PM
Cracker,
do you know much about the trophy sports props. or heard any good reviews about them??
Pete
Pete, i have not come across a Trophy Sports as yet :-/
the only Trophy i have seen and been in is the Trophy Plus and its a 4 blade prop, gets the boat on the plane real quick if matched right, good prop and hold ya on the plane at a lower rpm
Daz
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.